EN 1/2 ASSEMBLY INSTRUCTIONS SLIDING DOORS – CORNER SOLUTION Before setting up: Check that the interior measurement of the doors comply with the drawing. Item list Ceiling rail (length as per order) Floor rail (length as per order) 8 x Self-tapping screws 3.9 x 19 mm (TX 20) Double-sided adhesive tape Position stopper Ceiling rail corner stop Corner strip (additional purchase) Bumper stopper Cover buttons only used for doors with height adjustment in side profile 1: It is a good idea to pre-drill holes in the ceiling rail for screws before installation. Mount the first and last screw 5 cm from the edge. 2: Attach the ceiling rails to the ceiling. If ceiling rails are mounted in e.g. plaster/ concrete, raw plugs and other types of screws must be used (not included). 3: C orner stops are mounted in the ceiling rail. 4: P lace floor rail loosely without any tape. 5: P lace the door in the ceiling/floor rail. Align the door vertically and mark on each side of the corner solution where the floor rail is to be glued. 6: R emove the door again and mount tape on the floor rail. Mount the floor rail as marked. Insert the doors ready for adjustment. Doors in the corner are placed in the innermost track. These products are intended to be installed by a professional or skilled workman.
Download PDF fil