Features and options LA20 Inline | 4 Load in push: Load in pull: Housing colour: Protection class: Motor: Stroke length: Built-in dimensions: Mechanical spline: Static safety factor: Noise level: Exchangeable cable: Back fixture material: Nut: Safety nut: Feedback options: Piston rod eye: 2500 N 800 N Black (RAL 9005), black outer tube, or Light grey (RAL 7035) Black/grey only available as special solution IPX4, IPX6 24VDC, standard motor (type B or G) 20 – 300 mm (in steps of 1 mm) (Stroke from 201-300 mm will add 20 mm extension) 170 mm + stroke length (minimum 220 mm) Yes, as option (will add 20 mm to BID) 2.5 in push and 5.0 in pull Max 58 dB(A) (at nominal voltage and with no load, according to EN ISO 3743-1) Yes, LA20 connection plug (Microfit 30 Deg) (Always use cable lock) Solid composite (plastic bushings inside) Guided Yes. In pull only for 6 mm spindle pitch Dual Hall or Hall potentiometer Steel Ø22 mm +/- 0,25 mm Usage Operation temperature: Storage temperature: Compatibility: Relative humidity: Atmospheric pressure: Meters above sea level: Duty cycle: Cycles: Flammability rating: Approvals: +5 °C to +45 °C normal operating temperature -27 °C to +50 °C (according to test conditions ISO 7176-9) -40 °C to +70 °C (according to ISO 7176-9) Compatible with LINAK control boxes. Please contact LINAK. 20% to 80% – non-condensing 700 to 1060 hPa Max. 3000 meters Max. 10%, 2 minutes continuous use followed by 18 minutes not in use The LA20 life cycle test has been performed with a stabilised power supply (10% duty cycle) on a 120mm stroke actuator at max. load for 10,000 cycles (at ambient temperature) UL94-V0 IEC60601-1 ANSI/AAMI ES60601-1 CAN/CSA-22.2 No 60601-1 In compliance with ISO 7176-8
Download PDF file