Ordering example LA Actuator type: 20 Spindel pitch: 060 025 = 2.5 mm (2500 N) 050 = 5 mm (800 N) Stroke length: 050 xxx = mm (valid from 20 mm to 300 mm) Safety: 00 00 = No safety options 0C = Mech. spline without safety nut Feedback: Platform: 00 00 = None (F1) 0A = Hall Potentiometer (F7) 0 0 = None 030 = 3 mm (2200 N) 060 = 6 mm (600 N) 0A =Safety nut for Push 0D =Mech. spline with safety nut 0H =Dual Hall (Digital) (F2) LA20 Inline | 5 040 = 4 mm (1300 N) 0P = Safety nut for pull 0M = Dual Hall (Encoded) (F3) Motor type: Endstop: IP degree: Housing colour: Back fixture: Piston rod eye: Gear Option: A = 12 VDC (V1) B B = 24 VDC (V2) Running mainly with battery (e.g. CBJ1, CBJ2, CBJH, CBJC, CB8A & Customer supplied CB G = 24 VDC (V3) Running mainly on LINAK CB platforms e.g (CO61, CO71, CO41, CA30/40) 0 0 = Power switch (E1) 1 =Signal switch (E2) 2 = Encoded (E3) 6 4 = IPx4 6 =IPx6 - - = Black (RAL9005) - black outer tube + =Light Grey (RAL7035) 0 0 = Ø10.2 mm with plastic bushings 1 =Ø12.3mm without plastic bushings 0 0 = Steel solid, Ø10.2 mm with plastic bushings 3 =Steel with 6.1 mm slot, Ø10.2 mm without plastic bushings (+6,5 BID) 1 = Steel solid, Ø12.3 mm without plastic bushings 4 =Steel with 6.1 mm slot, Ø12.3 mm without plastic bushings (+6,5 BID) 2 = Steel with 6.1 mm slot, Ø10.2 mm with plastic bushings (+6,5 BiD) 3 3 = 3 Stage gear, ratio - 1 : 56 Not Used: Safety Factor: 0 0 = 2 1 = 1.5 2 = 2.5 Not Used: 0 Load Direction: 0 Not Used: 000 Installation dimension: 220 0 = 0 = Push P = Pull 000 = xxx = mm (min. installation 220 mm) (extension from 6 mm to 220 mm) Chosen item number: 2006005000000B06-0030200000220 Note: • Cable must be ordered separately • LA20 comes with one cable lock. If extra cable locks are needed they must be ordered separately for LA20 (for item number see later page) • Noise can occur if plastic bushings are not fitted in the piston rod eye/Back fixture • Black housing with grey outer tube is available as special solution
Download PDF file