Page number 4
CBD6S | 4 Options • Anti-Collision™. A system with Anti-Collision can limit the material damage to a desk if a collision with a solid object should occur (only applicable to systems with 3-stage columns, except LC1). • All CBD6S 200 W can charge the battery box BA001. • All CBD6S 300 W delivered from factory with SW version 1.57 and later can charge the battery box BA001. • Desk Sensor™ 1 (CBD6S with SW version 1.63 and later) • CBD6S with SW version 1.37 and later is as standard equipped with multi-parallel software (only CBD6S with SW version 1.46 or later works in multi-parallel systems with DPG). All CBD6S used in a multi-parallel system must have the same software version. Compatibility Compatible columns/actuators The CBD6S is ompatible with all DESKLINE columns and built-in actuators. Compatible accessories Accessory Safety Limit Switch CBDSLS Battery Box BA001 Desk Sensor™ 1 (DS1) Desk Sensor™ 2 (DS2) WiFi2LIN012 module CBD6S SW 03002000 Ver. 1.37 and later Ver. 1.63 and later Ver. 1.63 and later Ver. 1.63 and later Ver. 1.63 and later CBD6S SW 03002024 All version All version All version All version All version Compatible desk panels (controls) SW All DESKLINE desk panels can be connected and used, however the following LINbus desk panels require the stated software versions: LINbus desk panel SW Version DPF1C 0077025 1.05 or later (Not compatible with CBD6S SW 03002000 versions 1.13, 1.37, 1.47, and 1.49) 0077025 1.07 or later 0077083 All versions 0077098 All versions 03004005 All versions DPF4T 0077037 1.05 or later 0077089 All versions DPT 0077022 1.07 or later 0077058 1.03 or later If one of these LINbus desk panels with older software is connected to the CBD6S, it will not work.
Page number 5
CBD6S | 5 Usage • Duty cycle max. 10% ≈ 2 minutes continuous use at full load, followed by 18 minutes pause Always observe the duty cycle stated on the column product label as this may be lower. • For indoor use in dry locations Parameter Operation Storage and transportation Temperature 10 to 40 °C -10 to +50 °C Relative humidity 20% to 80% - non-condensing 20% to 80% - non-condensing Atmospheric pressure 700 to 1060 hPa 700 to 1060 hPa Altitude Max. 2000 m Max. 2000 m • Please note the LA23, LA31, DL1A, DL2, LC1, DL61 1200 N without PIEZO™, and BL1 require a special configuration (use the CBD6S configurator) BL1 in combination with CBD6S: - is not approved in accordance with EN 60335-1 and UL 962 - cannot lift the specified max. load - LINAK A/S does not support quality issues • Compatible with all DESKLINE columns and built-in actuators • Approvals and regional usage Version Power supply Approvals Region 300 W 100-240 V AC EN 60335-1, EN 13849-1, EN 62368 *, UL 962, PSE Worldwide 200 W 230 V AC EN 60335-1, EN 13849-1 Europe and Australia 200 W 120 V AC UL 962 The US 200 W 100 V AC PSE Japan *: Only with 2 and 4-channel versions
