Options: • Anti-Collision™. A system with Anti-Collision can limit the material damage on a desk if a collision with a solid object should occur (only for 3-stage columns) • Compatible with the battery box BA001 (CBD6S with SW version 1.37 and later) • All CBD6S 200 W can charge the battery box BA001 • All CBD6S 300 W delivered from factory with SW version 1.57 and later can charge the battery box BA001 • Desk Sensor™ 1 (CBD6S with SW version 1.63 and later) • CBD6S with SW version 1.37 and later is as standard equipped with multi-parallel software (only CBD6S with SW version 1.46 or later works in multi-parallel systems with DPG). All CBD6S used in a multi-parallel system must always contain the same software version. • Compatible with Safety Limit Switch CBDSLS. Usage: • Duty cycle max. 10 % ≈ 2 minutes continuous use at full load, followed by 18 minutes pause Always observe the duty cycle stated on the column product label as this may be lower • The control box is compatible with all DESKLINE ® columns, built-in actuators and DESKLINE controls • Please note the LA23, LA31, DL1A, DL2 and DL61 1200 N without PIEZO TM and BL1* require a special configuration (use the CBD6S configurator) • Approvals and regional usage Version Power supply Approvals Region 300 W 100-240 V AC EN 60335-1, EN 13849-1, UL 962, PSE Worldwide 200 W 230 V AC EN 60335-1, EN 13849-1 Europe and Australia 200 W 120 V AC UL 962 The US 200 W 100 V AC PSE Japan * BL1 in combination with CBD6S: - is not approved in accordance with EN 60335-1 and UL 962 - cannot lift the specified max. load - LINAK A/S does not support quality issues
Download PDF file