FlowCon FT Actuators 1B95050 - 04/2021 2 A 3 F2 0 T0. V 06.2 N 35 C -0 1 0 ,2 W 1403 Installation and Operation Instruction MadeinGermany The actuator types FlowCon FT.0.2 , FT.0.3 and FT.0.4 are thermal actuators, Normally Closed. FT.0.2 is 24V modulating and FT.0.3 and FT.0.4 are ON/OFF actuators. Fitting and Re-fitting 2 A 3 F2 0 T0. V 06.2 N 35 C -0 1 0 ,2 W 1403 Made in Germany NEVER install the actuator in closed posi- tion - this may damage the actuator and makes it difficult to install. To ensure that the valve is in an open position during com- missioning, all FT actuators are delivered in a Normally Open position and remain in this position until electrically operated first time. 2 A 3 F2 0 T0. V 06.2 N 35 C -0 1 0 ,2 W 1403 Made in Germany 2 A 3 F2 0 T0. V 06.2 N 35 C -0 1 0 ,2 W 1403 Made in Germany >click< The FT actuators are as standard supplied with a separate black adaptor ring. The FT.0.2 comes with plug-in cable. The other FT actuators have fixed cables. Mount the adaptor ring on top of the valve and finger tighten. Do not use additional tools. If cable plug-in version, be sure cable is properly fitted next. The actuator can now be fitted on the adaptor ring. A click noise will indicate that the actuator is correctly fitted (se figure 1). Figure 1 Orientation Upside-down installation is allowed along with the standard horizontal and vertical installation. In case the actuator will have to be removed, activate the release mechanism. Push the front 360º button and removed the actuator from the adap- tor ring. Please make sure that the actuator is electrically opened, before re-fitting it on the valve. A special feature on the FT.0.2 will allow the ac- tuator to become tamper proof as the push but- ton can be removed. Figure 2 This paper is a supplement to the FlowCon General Instruction Latest release of any FlowCon material is available on www.flowcon.com Page 1 of 2
下载PDF文件