SPECIFICATIONS (.continued) FlowCon Intelligent Interface: Supply voltage: Power consumption: Cable: Communication standard: Control signal: Output signal: Humidity rating: Protection: Housing material: CE conformity: Protocol: Interface: Device profile: Baud rates supported: Services (BIBBS) supported: Participants: Load: 24V AC/DC 4W 3 groups: Group 1: fixed, 1 wire with quick-connector, 3 meter / 9 ft (T1) fixed, 1 wire with quick-connector, 1 meter / 3 ft (T2) fixed, 3 wires, 0.6 meter / 2 ft (analogue actuator communication) Group 2: fixed, 2 wires 0.6 meter / 2 ft (power and ground) fixed, 3 wires 0.6 meter / 2 ft (BACnet BMS communication) Group 3: fixed, 1 wire with quick-connector, 1 meter / 3 ft (P1) fixed, 1 wire with quick-connector, 1 meter / 3 ft (P2) fixed, 3 wires, 0.6 meter / 2 ft (BACnet actuator communication) RS485 2-10V DC 2-10V DC 5.95% rH, no condensation IP54 including upside-down mounting UL94 V0-rated plastic Yes BACnet MS/TP EIA-485 / RS-485 BACnet Application Specific Controller (B-ASC) type server 9600, 19200, 38400,57600, 76800 and 115200 DS-RP-B, DS-WP-B, DM-DDB-B, DM-DOB-B, DM-DCC-B, DS-RPM-B and DM-RD-B Up to 32 recommended, max. 127 participants 1/8 unit load Temperature sensors (T1 and T2): Supply voltage: Cable: Signal output: Media temperature: Working pressure: Housing material: Protection: Probe length: Probe diameter: CE conformity: Connection: Performance data: - Sensor type: - Accuracy: - Linearity: - Long time stability: - Response time: NA No cable, but with quick-connector Resistive -20°C to +120°C / -4° to +248°F 40 bar / 580 psi 304 stainless steel IP65 DN50-80 / 2”-3”: 12.7 mm / 0,5 in DN80-250 / 3”-10”: 84.7 mm / 3.3 in use of sensor pocket is recommended 6 mm / 0.236 in Yes 1/4” ISO PT1000 0.5% FS (Full Scale) ±0.5% FS (Full Scale) 0.1% FS (Full Scale) at 50°C (122°F): 2.3 sec / at 90°C (194°F): 5.4 sec. Tech note · FlowCon FIT DN50-250 / 2”-10” · april 2024 · www.flowcon.com Page 3 of 13
Download PDF file