CARE AND MAINTENANCE • To clean the product, use a piece of cloth, slightly wetted with (hot) water • DO NOT use harsh chemicals, cleaning solvents, bleaches or strong detergents • DO NOT use in open air environments and environments where the air temperature is below 0°C or above 95°C. When the water within the radiator freezes, it may cause problems. • The product is reliable for a maximum working pressure of 6 bar. DO NOT use the product above this maximum limit. • PH-value of the water used in the system should be between 6 and 9. • Artificially softened water should not be used in stainless steel radiators. • Once fixed and connected, the system should be properly flushed and filled in order to remove debris, sludge, solid particles and chemical residues, which may cause corrosion and damage within the system. A good water treatment inhibitor should be used within the system to avoid corrosion and sludge. • When the air is trappet within the radiator, it may cause inefficient warming. • Storage area should be clean, dry, closed and away from chemical solvents. Solvent filled Electric Radiators should be stored above 0°C. • Producer offers 10 (ten) years guarantee for STAINLESS STEEL RADIATORS, when installed on CLOSED SYSTEMS. • Producer shall not be liable for any violation to intellectual property rights of the goods and the compliance of the goods with rules and regulations of the countries, where the goods are sold. www.thermrad.nl www.thermrad.nl 29.04.2013 Rev:00 LINA USER MANUAL