INSTALLATION OF SOFT CLOSE ON DOORS WITH ALUMINIUM FRAME UK Version 3.1 We recommend that you read this manual carefully before mounting. NOTE! As the clear width and height in a room can change very easily over time, it may be necessary to readjust in order for the softclose functi- on to work optimally. The easiest way is to adjust the activator part in the ceiling rail. Save this guide as a precaution for future readjustment. Damper 1x 1. B Connector 2x A A B Installation of soft close: Mount the connectors (B) on the damper (A). Note! Illustration shows mounting for a left door. Activator 1x B Torx 10: 2,9 x 16 mm Torx 20: 3,9 x 13 mm 4x 2x C D E 2a. D Left door 2b. D Right door D D Distance min. 50 mm Distance min. 50 mm The soft close is mounted on the door at least 50 mm from the side profile. Pay attention to the location of the soft close on the right and left doors. Soft close on the middle doors: Soft close on the door is placed in the same way as the other doors. 3. 4. Section of ceiling rail 5. Section of ceiling rail Distance = X mm A Distance = X mm C E Measure the distance on the door from the start plastic connector to the end side profile. Distance = X mm. The same distance (X mm) is measured from wall/ panel/adapter, and the activator is mounted on the ceiling rail as highlighted here. Soft close on middle doors: Activator is placed X mm from the wall/panel/adapter. The soft close function now works against the wall/panel/adapter. The activator and / or door are adjusted (torx 10) until the activator in the ceiling rail grips the damper on the door. 6. Section of ceiling rail Left door Position stops are mounted on center doors to position the door in the middle. Left door Scan the QR code to see assembly animation.
Download PDF fil