EN 2/2 ASSEMBLY INSTRUCTIONS SLIDING DOORS 7: I f there is air between the door and wall/adapter/panel in the middle of the side profile, knock the side profilen out with a small tapping block and hammer. This may be necessary as there are tolerances for the different materials in the door. Position stopper Inside of the top rail Top wheel 8: M ount bumper stoppers on the side profile. If impact tape has been additionally purchased, bumper stoppers do not need to be mounted. 9: C over the holes in the side profile (does not apply to all profiles) with cover buttons. 10: Position stoppers are mounted in the ceiling rail (on the vertical side of the ceiling rail). Mark where the top wheel is in closed position. Attach the position stopper as marked. NOTE! For soft-close doors, see soft-close instructions.
Download PDF fil