EN ASSEMBLY INSTRUCTIONS 82–94 ADAPTER A standard adapter is supplied with excess height for trimming at the top and bottom if reduction is not selected. Item list Adapter Depth: 100. 175 mm Height: Variable (Standard 2750 mm) 4 x Cover buttons Cut the adapter to the correct height * . After cutting, the sharp edge is polished to strengthen the melamine. Standard depth: 680 mm 1: M ount the adapter so it is vertically aligned both ways and at the correct depth. The adapter can be fixed with mounting adhesive or screws (not included). When mounting with screws, use the cover buttons. * H ow should the adapter be positioned in relation to the rest of the carcass? Together with the bottom plate/base and roof plate: Place on top of the bottom plate and up to the lower edge of the roof. Together with bottom/ceiling strip: The adapter must be continuous These products are intended to be installed by a professional or skilled workman.
Download PDF fil