DENK ASSEMBLY INSTRUCTIONS DRAWER WITH FRONT Item list Drawer with front height 124 and 188 mm Pull-out rail 1 x left, 1 x right 4 x System screw 4.2 x 10 mm per pull-out 1: M ount rails in panel – see height position on drawing. A B 2: T he drawer is inserted into the rails. The protuding peg at the rear of the rail must hit the hole in the rear of the pull-out plate. 3: P ull-out is placed on top of the protruding peg in the rail. 4: T he rail can adjust the height of the drawer (A), lock the drawer (B). These products are intended to be installed by a professional or skilled workman.
Download PDF fil