PARTNERCOMPANY HYUNDAI MARINE HYUNDAI MARINE IND. CO., LTD R Technology for a Cleaer Environment NEW THINKING. NEW POSSIBILITIES HYUNDAI DOOSAN INFRACORE

Operating Principle After the blades leave the cam, the blades pop up. The action creates a vacuum, which draws liquid into pump Each blade draws in liquid and carries it to the outlet port When the blades compress, they expel the remainder of the liquid. The flow is continuous and uniform Determining Inlet and Outlet Port depending on Rotating Direction When the direction of rotating is counterclockwise, the left port is inlet, the right port is outlet When the direction of rotating is clockwise, the right port is inlet, the left port is outlet In pumps manufactured by JMP, Rotating Direction is counterclockwise, left picture, the point of view with end cover(impeller cover) For Good Pumping Pipe runs should always be kept as short and straight as possible, avoiding rising and going over obstructions, as this can create air-locks. Plumbing should be reinforced, non-collapsible hose of the recommended size.kkkkk Flexible impeller pumps must not be run dry (more than 30 seconds). Bilge pumps and water pumps in particular should always be fastened to the boat structure to ensure their permanent location. Mount Flexible impeller pumps so that some water is left in the pump body when the pump is off. This will prolong impeller life and speed priming. Pumps must be installed with the overboard discharge well above the waterline to avoid water siphoning back into the vessel.kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk Features Strong bronze body Long life mechanical seal High performance and Long life flexible impeller Design with easy replacement of spare parts O-Ring seals at end cover instead of gasket Others Manufacturing pumps to your specification are available.(OEM) Please contact us or dealers when for use on other applications. 08 JMP CORPORATION FLEXIBLE IMPELLER PUMPS