Page number 2
More than just a face mill One pocket, three insert types. The Octomill™06 multi-insert pocket design can handle three different insert types to meet different application demands: face milling, moderate high feed milling and round inserts for profiling. Outperforming existing octagonal systems. Octomill™06 keeps the strength of common facemill systems with eight cutting edges but also adds edge strength and robustness while overcoming the weaknesses of single-sided solutions. The chip formation is comparable to Quattromill™. The spiral chip shape is beneficial for close pitch cutters especially in long-chipping materials, such as stainless steel, superalloys, non-ferrous materials or low-alloyed steel. Easy and secure handling. The interface design mimics the characteristic of a double-sided insert. This leads to improved self- centering and secure positioning of the insert for enhanced run-out accuracy as well as edge-to-edge repeatability. Plus, you can index the insert directly in the pocket seat without having to remove the screw. Utilization of more cutting edges. The groove interface works as a defined limitation or breakage point when over-running the insert and avoids damaging the pocket seat.
Page number 3
Multi-insert pocket approach The multi-insert pocket design of Seco Octomill™06 enables one cutter body to achieve excellent results in a variety of applications, including face milling, ramping, helical interpolation and profiling. Face milling insert Moderate High Feed insert Round 16 insert OO.T0605ZZ.R (integrated wiper) OO.T060510TN (pure radii) KAPR = 40° APMX = 4 mm Wiper = 1,5 / 0 mm OOMT0605ZZSR-MHF-M16 KAPR = 20° APMX = 1,5 mm Wiper = 1,2 mm ROMT1605M0T-8-M14 APMX = 2,2 mm (CEDC = 8) APMX = 7,5 mm (CEDC = 4) Round 16: ROMT1605M0T-8-M14 — Lighter cutting alternative to R217/220.29I / RP.T1605 range due to more positive axial angle. — Reduces the cutting forces. — Great for weak set ups and long reach. — Smoother cutter entry and exit. — No insert rotation during machining due to rigid 90° interface. — Indexing options 4 and 8 per insert: — Index 8: ap max = 2,2 mm — Index 4: ap max = 7,8 mm — Designed for facing, ramping, helical interpolation and profiling. Moderate high feed: OOMT0605ZZSR-MHF — Fast face milling (moderate feed): — Lower depth of cut a p < 1,5 mm. — Sensitive radial force settings. — Materials tending to generate notch wear, such as SMG M and S. — Integrated wiper flat generates an acceptable surface finish even at higher feed rates. — Edge line design can handle stock variation above a p = 1,5 – 2,6 mm. — Made for facing of open surfaces. Depth of cut a p [mm] 7,0 6,0 Round Insert ROMT1605M0T-8-M14 5,0 4,0 3,0 Face Inserts / KAPR = 40° OO.T0605ZZ. 2,0 OO.T060510. 1,0 Moderate High Feed Insert / KAPR = 20° OOMT0605ZZSR-MHF-M16 0,10 0,20 0,30 0,40 0,50 0,60 0,70 0,80 0,90 1,0 Feed per tooth - f z ≥ [mm]
