Page number 2
More than just a face mill. One pocket. Three insert types. The Octomill™06 multi-insert pocket design can handle three different insert types to meet different application demands: face milling, moderate high feed milling and round inserts for profiling. Outperforming existing octagonal systems Octomill™06 keeps the strength of common facemill systems with eight cutting edges but also adds edge strength and robustness while overcoming the weaknesses of single-sided solutions. The chip formation is comparable to Quattromill™. The spiral chip shape is beneficial for close pitch cutters especially in long-chipping materials, such as stainless steel, superalloys, non-ferrous materials or low-alloyed steel. Easy and secure handling The interface design mimics the characteristic of a double-sided insert. This leads to improved self-centering and secure positioning of the insert for enhanced run-out accuracy as well as edge-to- edge repeatability. Plus, you can index the insert directly in the pocket seat without having to remove the screw. Utilization of more cutting edges The groove interface works as a defined limitation or breakage point when over-running the insert and avoids damaging the pocket seat.
Page number 3
Technical specifications Cutter range: 40-250 mm (2.00 - 6.00 inch) Multi-insert range: OO.T0605 face milling inserts OOMT0605-MHF moderate high feed ROMT1605 round 16 insert Wiper inserts: 2 wiper inserts for higher demands in surface finish or finishing perfor- mance OOET0605ZZER-W8-M10 and OOET0605ZZSR-W4-M15. Insert grades for: Mounting type: PMK S NH Weldon & Arbor. Octomill™ 06: Working areas The multi-insert pocket design of Seco Octomill™06 enables one cutter body to achieve excellent results in a variety of applications, including face milling, ramping, helical interpolation and profiling. Face Milling Inserts Moderate High Feed Insert option Round 16 Insert Option OO.T0605ZZ.R (integrated wiper) OO.T060510TN (pure radii) KAPR = 40° APMX = 4,0 mm Wiper = 1,5 / 0 mm OOMT0605ZZSR-MHF-M16 KAPR = 20° APMX = 1,5 mm Wiper = 1,2 mm ROMT1605M0T-8-M16 KAPR = 20° APMX = 1,5 mm Wiper = 1,2 mm Depth of cut a p [mm] 7,0 6,0 Round Insert ROMT1605M0T-8-M14 5,0 4,0 3,0 Face Inserts / KAPR = 40° OO.T0605ZZ. 2,0 OO.T060510. 1,0 Moderate High Feed Insert / KAPR = 20° OOMT0605ZZSR-MHF-M16 0,10 0,20 0,30 0,40 0,50 0,60 0,70 0,80 0,90 1,0 Feed per tooth - f z ≥ [mm]
