GERA control unit LED white adaptation with radio remote control Control unit teaching 1. Remove the insulating strip from the battery compartment in the remote controller 1 2. Briefly press the learning button of the control unit 2 3. Press and hold a zone key (for more than 1 sec.) until the light goes out for a short time 3 4. The control unit is connected to the corresponding zone key It can control up to four different zones. As an alternative, several control units can be taught to synchronously control one zone. To reset the control unit, press and hold the learning button (for more than 3 seconds) Power supply cord LED transformer 2 Control unit: radio remote 2 control m extension cable Six-line dristributor www.gera-leuchten.de Mounting instructions, operating instructions 29.08.2017 Electrical connection Connect the two-pole supply to a 230V mains voltage Note The electrical connection must be made by a skilled electricia Power supply voltage 230V/50Hz Caution! Do not damage the power cable On/Off button for all control units Cool white Memory key Press and hold the key (for more than 3 sec.) to store the values set. Press the key for a short time to recall the stored settings * CW WW * S 12 34 Lighter Warm Darker Colour cycle Zone keys 1-4 3 1
Teilen
Ausdrucken
PDF-Datei herunterladen