Page number 1

8C - C.I. BOXES CAST IRON METER BOXES FOR 5/8"x3/4" METERS With locking lid, angle inlet and 3/4" FIP horizontal coupling outlet Inlet coupling Inlet size Box height Catalog number Mueller 110 (CTS) 3/4" 7" H-1452-AN Mueller 110 (CTS) 3/4" 9" H-1452-AN INSTA-TITE (CTS) 3/4" 7" H-1452-BN INSTA-TITE (CTS) 3/4" 9" H-1452-BN Mueller 110 (IPS) 3/4" 7" H-1452-CN Mueller 110 (IPS) 3/4" 9" H-1452-CN INSTA-TITE (IPS) 3/4" 7" H-1452-DN INSTA-TITE (IPS) 3/4" 9" H-1452-DN Copper flare 3/4" 7" H-1452-EN Copper flare 3/4" 9" H-1452-EN Mueller 110 (CTS) 1" 7" H-1452-JN Mueller 110 (CTS) 1" 9" H-1452-JN Copper flare* 3/4" 7" H-1452-2N Copper flare* 3/4" 9" H-1452-2N Mueller 110 (CTS)* 3/4" 7" H-1452-3N Mueller 110 (CTS)* 3/4" 9" H-1452-3N Pack Joint (CTS) 3/4" 7" P-1452-AN Pack Joint (CTS) 3/4" 9" P-1452-AN Pack Joint (CTS) 1" 7" P-1452-JN Pack Joint (CTS) 1" 9" P-1452-JN Pack Joint (CTS)* 3/4" 7" P-1452-3N Pack Joint (CTS)* 3/4" 9" P-1452-3N * Inlet connections are integral to the meter box. Note: Meter boxes will not be sold without the inlet coupling. Touch read hole available. Contact Mueller Customer Service Center for more information. Note: For an inlet reduced port ball valve replace the "H1" with a "B2" when ordering. Example: H1452-3N - B2452-3N With non-locking lid, angle inlet and 3/4" FIP horizontal coupling outlet Inlet coupling Inlet size Box height Catalog number Mueller 110 (CTS) 3/4" 7" H-1453-AN Mueller 110 (CTS) 3/4" 9" H-1453-AN INSTA-TITE (CTS) 3/4" 7" H-1453-BN INSTA-TITE (CTS) 3/4" 9" H-1453-BN Mueller 110 (IPS) 3/4" 7" H-1453-CN Mueller 110 (IPS) 3/4" 9" H-1453-CN INSTA-TITE (IPS) 3/4" 7" H-1453-DN INSTA-TITE (IPS) 3/4" 9" H-1453-DN Copper flare 3/4" 7" H-1453-EN Copper flare 3/4" 9" H-1453-EN Copper flare* 3/4" 7" H-1453-2N Copper flare* 3/4" 9" H-1453-2N Mueller 110 (CTS)* 3/4" 7" H-1453-3N Mueller 110 (CTS)* 3/4" 9" H-1453-3N Pack Joint (CTS) 3/4" 7" P-1453-AN Pack Joint (CTS) 3/4" 9" P-1453-AN Pack Joint (CTS)* 3/4" 7" P-1453-3N Pack Joint (CTS)* 3/4" 9" P-1453-3N 8C.1 Shaded area indicates change Rev. 11-17 (H-1452-3N shown) (P-1453-3N shown) * Inlet connections are integral to the meter box. Note: Meter boxes will not be sold without the inlet coupling. Touch read hole available. Contact Mueller Customer Service Center for more information Note: For an inlet reduced port ball valve replace the "P1" with a "P2" when ordering. Example: P1453-3N - P2453-3N See pages 8C.5, 8C.6 and 8C.7 for tubing or pipe that can be used with Mueller 110®, Pack Joint and INSTA-TITE® connections. Mueller Valves and Couplings are manufactured and tested in accordance with ANSI/AWWA C800.Components in contact with potable water will also comply with latest requirements of the Federal Safe Drinking Water Act.