Page number 2

8.2 JONES® SERVICE FITTINGS Rev. 12-14 Shaded area indicates change Copper Flare Connection ❏ ❏ CONNECTION MEETS - all applicable parts of AWWA C800 standard. CONVEX SURFACE - in nut opposes convex surface on body to provide a line contact, assuring greater pullout resistance and a dependable seal. PRESSURE RATING - The pressure holding capability of the Copper Flare Connection is designed to be greater than that of the valve or ❏ fitting on which it is used (only in potable water distribution applications complying with AWWA standards). ❏ ❏ COPPER FLARE CONNECTION - is for use on type "K" copper tubing . EXTRA LONG SKIRT - on copper flare nut provides added support to tubing and reduces possibility of leaks. Pack Joint Connection ❏ ❏ NUT - corrosion resistant cast bronze ASTM B62 (85-5-5-5). GASKET - compressed against the fitting and pipe outer surface by tightening of nut. Not interchangable with the Jones® 110 Compression Connection gasket. PACK JOINT CONNECTION- available in three styles: for type "K" copper and PE tubing (CTS), for IPS PE (PEP) and PVC pipe.* 3/4" & 1" CTS NUT/GASKET ASSEMBLY ARE INTERCHANGABLE - with comparable size of Jones® 110 Compression Connections nut/gasket assembly CTS only. (Note that 1-1/2" and 2" CTS components and all sizes of IPS components are NOT interchangeable.) PRESSURE RATING - The pressure holding capability of the Pack Joint Connection is designed to be greater than that of the valve or fitting on which it is used (only in potable water distribution applications complying with AWWA standards). ❏ ❏ ❏

Page number 3

JONES® SERVICE FITTINGS Shaded area indicates change Rev. 12-14 8.3 JONES® Grip Compression Connection The JONES Grip Compression Connection is a stab connection with large wrench flats. It is available in CTS and can be ordered by adding a "MG" at the end of an existing compression connection Part Number (EX: E1937MG). ❏ PRESSURE RATING -The pressure holding capability of the JONES Grip Compression Connection is designed to be greater than that of the valve or fitting on which it is used (only in potable water distribution applications complying with AWWA standards). GASKET - compressed against the fitting and pipe outer surface by tightening of nut. JONES GRIP COMPRESSION CONNECTION - available for type "K" copper and PE tubing (CTS). INTERCHANGEABLE - with 110 CTS Compression Connection in 3/4" - 1" or CTS Pack Joint in 1-1/2" - 2". NUT - corrosion resistant cast bronze. ASTM B584 Tubing or pipe Tubing or pipe O.D. range - inches wall thickness range - inches 0.872 - 0.878 0.061 - 0.069 0.871 - 0.879 1.121 - 1.129 1.120 - 1.130 1.621 - 1.630 1.619 - 1.631 2.120 - 2.130 2.119 - 2.131 0.097 - 0.107 0.061 - 0.069 0.125 - 0.137 0.067 - 0.077 0.181 - 0.199 0.076 - 0.090 0.236 - 0.260 ❏ ❏ ❏ ❏ Tubing, pipe and liners used with Jones Grip Compression Connection Nominal size of Material* connection 3/4" CTS 1" CTS 1-1/2" CTS 2" CTS Type "K" copper Polyethylene Type "K" copper Polyethylene Type "K" copper Polyethylene Type "K" copper Polyethylene Tubing or pipe I.D. range - inches 0.657 - 0.685 0.846 - 0.880 1.221 - 1.269 1.599 - 1.659 Liner part number 528704 528705 528706 528707 *Type“K”softcoppertubingperASTMB88;CTSpolyethylene(PE)perASTMD-2737-SDR-9 Grip Joint kits Size 3/4" CTS 1" CTS 1-1/2" CTS 2" CTS Liner Kit Grip ring 312919 312920 312921 312922 Washer 311692 311695 538107 538108 Gasket 537881 537882 537883 538109 Connection nut 537838 537839 537840 537841 682861 682862 682863 682864

    ...