Page number 8

14.8 Rev. 1-15 Shaded area indicates changes MUELLER® 110® COMPRESSION CONNECTION & PACK JOINT INFORMATION AND KITS Tubing or pipe O.D. range (in.) 0.872 - 0.878 0.871 - 0.879 1.127 - 1.129 1.120 - 1.130 1.045 - 1.110 1.046 - 1.054 1.329 - 1.399 Tubing or pipe wall thickness range (in.) 0.061 - 0.069 0.097 - 0.107 0.061 - 0.069 0.125 - 0.137 0.118 - 0.138 0.113 - 0.134 1.150 - 0.170 Tubing or pipe I.D. range (in.) 0.657 - 0.685 0.846 - 0.880 0.809 - 0.834 0.788 - 0.828 0.698 - 0.746 Liner part number 504281 504385 505141 509759 509760 Tubing, pipe, and liners used with 110 compression Nominal size of connection 3/4" CTS 1" CTS Material Type "K" copper Polyethylene PE Type "K" copper Polyethylene PE Polyethylene PE 3/4" IPS 3/4" Sch, 40 PVC 3/4" Sch, 80 PVC Type "K" copper tubing per ASTM B88 CTS polyethylene (PE) per ASTM D-2737 SDR-9 IPS polyethylene (PE) per ASTM D-2239 PE SIDR-7 Polyvinylchloride (PVC) per ASTM D1785 110 compression connection replacement parts Size 3/4" CTS 1" CTS 3/4" IPS † Gasket and gripper band assembly Gasket part number † 581949 581951 89599 Connection nut 507831 507835 508826 Liner Gasket Assembly Nut Adapter Nut for pre-1976 style 110 Compression Connection for CTS tubing Kit includes one standard Gasket (same used with current style 110 connections) and a special Nut that adapts to the older style connection threads on the fittings. It is installed in the same way as the current style connection (Gasket conductor spring should be toward fitting body). Size 3/4" CTS 1" CTS Connection kit 682552 682551 Pack Joint connection kits (includes nut, gasket, and washer) † Nominal size of connection 3/4" CTS or CTS PE 1" CTS or CTS PE Tubing or pipe O.D. range (in.) 0.871 - 0.879 1.120 - 1.130 Tubing or pipe wall thickness range (in.) 0.097 - 0.107 0.125 - 0.137 Tubing or pipe I.D. range (in.) 0.657 - 0.685 0.846 - 0.880 Part number 681921 681922 † 3/4" & 1" size kits (CTS only) will interchange with valves or fittings using Mueller 110 Compression Connections (CTS). Tubing, pipe and liners for Pack Joint connection (not required for Type "K" copper pipe) Nominal size of connection 3/4" CTS or CTS PE 1" CTS or CTS PE Tubing or pipe O.D. range (in.) 0.871 - 0.879 1.120 - 1.130 Tubing or pipe wall thickness range (in.) 0.097 - 0.107 0.125 - 0.137 Tubing or pipe I.D. range (in.) 0.657 - 0.685 0.846 - 0.880 Pack Joint Kit Length of liner (in.) 1.625 2.125 Part number J-2805 J-2805 Liner USPVH Valves and Couplings are manufactured and tested in accordance with ANSI/AWWA C800.Components in contact with potable water will also comply with latest requirements of the Federal Safe Drinking Water Act.

Page number 9

MUELLER® INSTA-TITE® CONNECTION INFORMATION Polyethylene PE tubing and pipe used with INSTA-TITE connections Nominal size of connection 3/4" CTS 3/4" IPS Material Polyethylene PE Polyethylene PE Tubing or pipe O.D. range (in.) 0.871 - 0.879 1.045 - 1.110 Shaded area indicates change Rev. 4-01 14.9 Tubing or pipe wall thickness range (in.) 0.097 - 0.107 0.118 - 0.138 Tubing or pipe I.D. range (in.) 0.657 - 0.685 0.809 - 0.834 CTS polyethylene (PE) per ASTM D-2737 PE2306,3306, SDR-9 IPS polyethylene (PE) per ASTM D-2239 PE SIDR-7 INSTA-TITE connection replacement parts Size 3/4" CTS (red gripper) 3/4" IPS (white gripper) † Gripper ring assembly. Gripping ring part number † 506325 505885 O-ring part number 506324 505883 Gripper ring O-ring Optional tools for use with corporation stops having INSTA-TITE® Connection outlets To insure proper installation, the end of the pipe or tubing must be properly beveled before it is inserted into the INSTA-TITE Connection. USPVH offers a special beveling tool for both CTS PE tubing and IPS PE pipe. PART NUMBER: H-18015 for 3/4" and 1" CTS tubing PART NUMBER: H-18017 for 3/4" and 1" IPS pipe Pipe removal tool Pipe or tubing may be removed from the INSTA-TITE Connection using special removal tools. Use one tool for 3/4" size connection and two tools for 1" size. PART NUMBER: 506336

    ...