Page number 38

2.38 Rev. 11-18 Shaded area indicates changes 2”- 12” A-USP2 RESILIENT WEDGE GATE VALVES - M.J. x FL. ❏ Catalog number A-USP2-16 mechanical joint x flanged ends (with accessories unassembled) A-USP2-19 mechanical joint x flanged ends (less accessories) ❏ Sizes – 2”, 3”, 4", 6", 8", 10", 12" ❏ Meets or exceeds all applicable requirements of ANSI/AWWA C509, UL 262 Listed, FM 1120/1130 Approved, and certified to ANSI/NSF 61 & 372 ❏ Flanged end drilling complies with ASME/ANSI B16.1 class 125 and B16.42 class 150 ❏ Mechanical joint end complies with ANSI/AWWA C111 Standard ❏ Iron body with nominal 10 mils Pro-Guard ® Fusion Bonded Epoxy Coated interior and exterior surface ❏ Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard ❏ Iron wedge, symmetrical and fully encapsulated with molded rubber; no exposed iron ❏ Non-rising stem (NRS) ❏ Triple O-ring seal (2 above the thrust collar and 1 below) ❏ 2” square wrench nut – open left or open right ❏ 350 psig (2400 kPa/24 barg) maximum working pressure; 700 psig (4000 kPa/48 barg) static test pressure ❏ UL Listed, FM Approved: 350 psig (2400 kPa/24 barg) ❏ Designed for potable water applications A-USP2-16 shown M.J. accessories shipped unassembled Options See page 2.40 for more information on Resilient Wedge Gate Valve options ❏ Position indicators ❏ Stainless steel stem: Type 304, Type 316 ❏ Low zinc, silicon bronze ASTM B98-C66100/H02 stem ❏ Handwheel ❏ EPDM Disc and O-rings Resilient wedge gate valve parts Catalog Part Number Description Material Material Standard G-16 Bonnet Bolts & Nuts 316 Stainless Steel ASTM F593 (bolt) ASTM F594 (nut) G-41 Stuffing Box Bolts & Nuts 316 Stainless Steel AASSTTMM FF559934 ((bnoultt)) G-49 G-49 Stem O-rings (3) Nitrile ASTM D2000 G-200 Wrench Nut Cap Screw 316 Stainless Steel ASTM F593 G-201 Stuffing Box O-ring Nitrile ASTM D2000 G-202 Wrench Nut Ductile Iron ASTM A536 ▼ G-203 Stem Bronze ASTM B138 G-204 Hand Wheel (not shown) Cast Iron + ASTM A126 CL.B G-205 Stem Nut Bronze ASTM B584 G-206 Guide Cap Bearings Acetal - G-207 Stuffing Box with dirt seal** Ductile Iron Nitrile ASTM A536 ▼ ASTM D2000 G-208 G-209 G-210** Anti-friction Washers (2) Wedge, Rubber Encapsulation Bonnet Acetal Ductile Iron* SBR Ductile Iron - ASTM A536 ▼ ASTM D2000 ASTM A536 ▼ G-211** Bonnet O-ring ++ Nitrile ASTM D2000 G-212** Body Ductile Iron ASTM A536 ▼ *Fully encapsulated in molded rubber with no iron exposed **Dirt seal on 2 1/2” - 12” valves ▼ Material strength ASTM A536 65-45 minimum + Manufacturer’s option to change material to ductile iron ASTM A536 ++ 2”-3” valves use a bonnet gasket G-202 G-200 G-207 G-41 G-201 G-208 G-203 G-210 G-16 G-211 G-205 G-212 G-209 G-206 SEE PAGE 2.52 FOR ORDERING INSTRUCTIONS

Page number 39

2”- 12” A-USP2 RESILIENT WEDGE GATE VALVES - M.J. x FL. 2.39 Shaded area indicates change Rev. 8-17 Dimensions Dimension A L N O Q (bore) OO (bolt circle diameter) R UU FF B (number and size of holes) Turns to open Weight* 2” 9.88 2.50 4.62 4--.75 2.30 4.75 6.00 4.75 8.39 4--.75 8 56 3” 12.38 2.50 7.50 4--.75 3.30 6.19 7.50 6.00 8.8 4--.75 11 67 4" 14.19 2.50 9.12 4--.88 4.30 7.50 9.00 7.50 9.50 8--.75 14 115 Nominal Size 6" 18.00 2.50 11.12 6--.88 6.30 9.50 11.00 9.50 11.06 8--.88 20.5 168 * All dimensions are in inches. All weights include accessories are in pounds and are approximate. 8" 21.50 2.50 13.37 6--.88 8.30 11.75 13.50 11.75 12.09 8--.88 26.5 275 10" 25.50 2.50 15.62 8--.88 10.30 14.00 16.00 14.25 13.94 12--1.00 33 400 12" 28.62 2.50 17.88 8--.88 12.30 16.25 19.00 17.00 14.50 12--1.00 38.5 570

    ...