Page number 2

2.2 Rev. 7-19 Shaded area indicates changes 3”- 12” A-USP1 RESILIENT WEDGE GATE VALVES - M.J. x M.J. ❏ Catalog number A-USP1-20 Mechanical joint ends (with accessories unassembled) A-USP1-23 Mechanical joint ends (less accessories) A-USP1-25 Mechanical joint ends (with transition gaskets accessories unassembled) ❏ Sizes – 3”, 4”, 6”, 8”, 10”, 12” ❏ Non-rising stem (NRS) ❏ Meets or exceeds all applicable requirements of ANSI/AWWA C515*** Standard, UL 262 Listed, FM 1120/1130 Approved, and certified to ANSI/NSF 61 & 372 ❏ Standard mechanical joint ends comply with ANSI/AWWA C111 ❏ Nominal 10 mils Pro-Gard ® Fusion Bonded Epoxy coated interior and exterior surfaces. Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard ❏ Iron wedge, symmetrical and fully encapsulated with molded rubber; no exposed iron ❏ Triple O-ring seal (2 above the thrust collar and 1 below) ❏ 2” square wrench nut - open left or open right ❏ 350 psig (2400 kPa/24 barg) maximum working pressure; 700 psig (4800 kPa/48 barg) static test pressure ❏ UL Listed, FM Approved: 350 psig (2400 kPa/24 barg) ❏ Designed for potable water applications § A-USP1-20 shown Options See page 2.40 for more information on Resilient Wedge Gate Valve options ❏ Position indicators ❏ Stainless steel stem: Type 304, Type 316 ❏ Low zinc, silicon bronze ASTM B98-C66100/H02 stem ❏ Handwheel ❏ EPDM Disc and o-rings Resilient wedge gate valve parts Catalog Part Number Description G-16 Bonnet Bolts & Nuts Material 316 Stainless Steel G-41 G-49 G-200 G-201 G-202 G-203 G-204 G-205 G-206 G-207 G-208 G-209 G-210 G-211 G-212 Stuffing Box Bolts & Nuts Stem O-rings (3) Wrench Nut Cap Screw Stuffing Box O-ring Wrench Nut Stem Hand Wheel (not shown) Stem Nut Guide Cap Bearings Stuffing Box with dirt seal Anti-friction Washers (2) Wedge, Rubber Encapsulation Bonnet Bonnet O-ring +++ Body 316 Stainless Steel Nitrile 316 Stainless Steel Nitrile Ductile Iron Bronze Cast Iron + Bronze Acetal Ductile Iron Nitrile Acetal Ductile Iron* SBR Ductile Iron Nitrile Ductile Iron Material Standard ASTM F593 (bolt) ASTM F594 (nut) ASTM F593 (bolt) ASTM F594 (nut) ASTM D2000 ASTM F593 ASTM D2000 ASTM A536 ▼ ASTM B138 ASTM A126 CL.B ASTM B584 - ASTM A536 ▼ ASTM D2000 - ASTM A536 ▼ ASTM D2000 ASTM A536 ▼ ASTM D2000 ASTM A536 ▼ +++ 3” valves use a bonnet gasket *Fully encapsulated in molded rubber with no iron exposed; 3” discs are cast iron ASTM A126 Class B ▼ Material strength ASTM A536 65-45 minimum + Manufacturer’s option to change material to ductile iron ASTM A536 *** 3” valves meet or exceed all applicable requirements of ANSI/AWWA C509 Standard SEE PAGE 2.52 FOR ORDERING INSTRUCTIONS

Page number 3

3"- 12" A-USP1 RESILIENT WEDGE GATE VALVES - M.J. x M.J. 2.3 Shaded area indicates change Rev. 2-17 § Dimensions Dimension A FF L N O (number and size of holes) DD Q OO (bolt circle diameter) Turns to open Weight* 3” 12.38 9.62 2.50 7.50 4--.88 4.62 3.30 6.19 11 83 4" 14.19 9.50 2.50 8.40 4--.88 4.50 4.30 7.50 14 70 Nominal Size 6" 18.00 8" 21.50 10.00 10.50 2.50 2.50 10.41 12.68 6--.88 6--.88 5.00 5.50 6.30 8.30 9.50 11.75 20.5 26.5 112 162 *All dimensions are in inches. All weights include accessories are in pounds and are approximate. 10" 25.50 11.50 2.50 15.24 8--.88 6.50 10.30 14.00 33.0 238 12" 28.62 12.00 2.50 18.024 8--.88 7.00 12.30 16.25 38.5 303

    ...