SECTION 3 – Service Fittings JONES® Grip Compression Connection The JONES® Grip Compression Connection is a stab connection with large wrench flats. It is available in CTS and can be ordered by adding a "MG" at the end of an existing compression connection Part Number (EX: E1937MG). ɡ PRESSURE RATING -The pressure holding capability of the JONES Grip Compression Connection is designed to be greater than that of the valve or fitting on which it is used (only in potable water distribution applications complying with AWWA standards). ɡ GASKET - compressed against the fitting and pipe outer surface by tightening of nut. ɡ JONES GRIP COMPRESSION CONNECTION - available for type "K" copper and PE tubing (CTS). ɡ INTERCHANGEABLE - with 110 CTS Compression Connection in 3/4" - 1" or CTS Pack Joint in 1-1/2" - 2". ɡ NUT - corrosion resistant cast bronze. ASTM B584 Tubing, pipe and liners used with Jones Grip Compression Connection Nominal size of Material* connection 3/4" CTS Type "K" copper Polyethylene Tubing or pipe O.D. range - inches 0.872 - 0.878 0.871 - 0.879 Tubing or pipe Tubing or pipe wall thickness range I.D. range - inches - inches 0.061 - 0.069 - 0.097 - 0.107 0.657 - 0.685 1" CTS Type "K" copper Polyethylene 1.121 - 1.129 1.120 - 1.130 0.061 - 0.069 0.125 - 0.137 0.846 - 0.880 1-1/2" CTS Type "K" copper Polyethylene 1.621 - 1.630 1.619 - 1.631 0.067 - 0.077 0.181 - 0.199 1.221 - 1.269 2" CTS Type "K" copper Polyethylene 2.120 - 2.130 2.119 - 2.131 0.076 - 0.090 0.236 - 0.260 1.599 - 1.659 *Type “K” soft copper tubing per ASTM B88; CTS polyethylene (PE) per ASTM D-2737 - SDR-9 Liner part number 528704 528705 528706 528707 Grip Joint kits Size 3/4" CTS 1" CTS 1-1/2" CTS 2" CTS Kit 682861 682862 682863 682864 Grip ring 312919 312920 312921 312922 Washer 311692 311695 538107 538108 Gasket 537881 537882 537883 538109 Connection nut 537838 537839 537840 537841 Liner Rev 10-18 3
Share
Print
Download PDF file
To download individual pages from this catalog*:
*You may also visit the product web page and click the print icon in the upper right corner.