Page number 12

MUELLER ® LUBOSEAL ® METER VALVE - 500 PSIG Rev. 10-21 Shaded area indicates changes o Catalog number – H-11185 o Sizes**– 1/2"x3/4"*, 3/4", 1", 1-1/4", 2" o Meets the tested requirements specified in ASME B16.33 o Ductile iron body valve and ductile iron key o Lockwing head o Special lubrication system---can be re-lubricated under pressure o Quad-ring sealed key o Tamperproof feature o Inlet and outlet with recessed internal I.P. (F.I.P.) thread o Available finishes: black (as cast), galvanized, electro-coat epoxy gray, electro-coat Rustoleum gray o 500 psig (3450 kPa) o Available with 1/8" test port feature Optional Equipment H-11199 H-11199 Relubricating Tool Used to relubricate Mueller Luboseal Meter Valves with H-853 lubricant shown below. A hex wrench is built into the tool handle for removal of valve lubricating port pipe plug. One tool fits all valve sizes. 14.1 2 H-11185 H-853 H-853 Ground Key Lubricant Used for dry, natural or manufactured gas, air and vacuum applications. NOT recommended for petroleum solvents, mineral oils or concentrated acids or alkalies. Box of 24 #1 sticks H-11185 Mueller Luboseal Meter Valve Dimensions G Dimension Valve Size** A = NPT 1/2" x 3/4"* 3/4" 1" 1-1/4" 2" A 1/2"-14 x 3/4" -14 3/4"-14 1"-11-1/2 1-1/4"-11-1/2 2"-11-1/2 B 1-27/32" 1-27/32" 2-15/64" 2-43/64" 3-31/32" F C 4-7/16" 4-7/16" 5-3/16" 5-3/4" 6-3/4" D 2-7/32" 2-7/32" 2-1/32" 2-7/8" 3-3/8" B E 2-11/64" 2-11/64 2-9/64" 2-7/8" 3-1/2" F 2-11/32" 2-11/32" 2-5/8" 3-1/16" 3-13/16" E G 59/64" 59/64" 1-11/64" 1-27/64" 1-29/32" D C *First size is size of inlet, second is size of outlet. *Nominal

Page number 13

14.1 3 MUELLER ® LUBOSEAL ® DOUBLE LOCKWING METER VALVE - 175 PSIG Shaded area indicates change Rev. 10-21 o Catalog number – H-11195 o Sizes* – 1" and 2" o Meets the test requirements specified in ASME B16.33 o Iron body valve and ductile iron key o Double lockwing head o Special lubrication system---can be re-lubricated under pressure o O-ring sealed key o Tamperproof feature o Inlet and outlet with internal I.P. (F.I.P.) thread o Available finishes: black (as cast), galvanized, electro-coat epoxy gray, electro-coat Rustoleum gray o 175 psig (1208 kPa) o Available with 1/8" test port feature H-11195 Optional Equipment H-11199 H-11199 Relubricating Tool Used to relubricate Mueller Luboseal Meter Valves with H-853 lubricant shown below. A hex wrench is built into the tool handle for removal of valve lubricating port pipe plug. One tool fits all valve sizes. H-853 H-853 Ground Key Lubricant Used for dry, natural or manufactured gas, air and vacuum applications. NOT recommended for petroleum solvents, mineral oils or concentrated acids or alkalies. Box of 24 #1 sticks H-11195 Mueller Luboseal Meter Valve Dimensions Dimension A B C D E F G 1" 1"-11-1/2 2-15/64" 3-13/16" 1-29/32" 2-5/32" 1-57/64" 1-11/64" 2" 2"-11-1/2 3-41/64" 5-9/32" 2-41/64" 3-17/64" 2-31/32" 1-29/32" *Nominal

    ...