Page number 23
MUELLER ® SIDE-OUT LINE STOPPER FITTINGS 11.23 Rev. 12-12 Shaded area indicates changes Equipment required to install and stop-off H-17357 welding Line Stopper Fitting Tool Name Drilling Machine Stopping Machine Gate Valve Drilling Machine Adapter Cutter Hub Shell Cutter Pilot Drill Steel Wedge Stopper* Completion Machine Plug Alignment Tool Plug Inserting Tool Plug Extracting Tool Completion Plug Wrench Thread Cleaning Tool Inspection Flange Quantity Required 1 2 2 1 1 1 1 2 1 1 1 1 1 1 1 Line Stopper Unit No. 4SW 10" x 12" H-17357 C1-36 H-17440 83565 or 83318† 83323 682782 682780†† 682781 89704 H-17445 83250 83237 83238 36424 89321 H-17619 *Steel Wedge Stopper with urethane cover suitable for use with gas and petroleum. † The 83565 Gate Valve has a maximum working pressure of 275 psig and the 83318 Gate Valve has a maximum working pressure of 500 psig. †† Thick Wall 12" Shell Cutter option available.(682884)
Page number 24
11.24 Shaded area indicates change Rev. 12-06 MUELLER ® LINE STOPPER FITTING WELDING TYPE - 1440 PSIG o Cat alog number – H-17258 o Sizes – 4" x 3"**, 4", 6", 8" o For use on steel pipe only o O-ring sealed steel (ASTM A216 WCB) Completion Plug with equalizing valve (part # 580912) Completion Cap Completion Cap Bolts and Nuts Completion Plug O-ring o Flange, Completion Cap, fitting top and bottom halves are forged steel (ASTM A105) o Class 600 flange complies with dimensional requirements of ANSI B16.5 o 1440 psig***(9928 kPa) maximum working pressure at 100F (38C) Test Plug Gasket Equalizing Valve Completion Plug Assembly Pipe Dimension Size* of Line Stopper Fitting 4" x 3"** 4" 6" 8" Outside Diameter of Shell Cutter Required 4-1/4" 4-1/4" 6-1/4" 8-1/4" Outside Diameter of Pipe 3.500" 4.500" 6.625" 8.625" H-17258 Maximum Wall Thickness No limit No limit .432" (sch. 80) .406" (sch. 60) Pipe Dimensions Minimum Wall| Thickness No limit .188" .250" .250" Max Inside Diameter No limit 4.124" 6.125" 8.125" Drilling/Line Stopping Machine combinations that can be used to install and stop-off H-17258 Fittings Line Stopper Units Drilling Machine Unit No. 2 Unit No. 3 Unit No. 3SW Unit No. 3SW-500 H-17258 C1-36 4" x 3" and 4" 6" and 8" 4" x 3", 4", 6", and 8" 4" x 3", 4", 6", and 8" Replacement Parts Fitting Size* 4" x 3"** 4" 6" 8" Completion Cap Test Plug 46708 46708 79891 79906 64134 64134 64134 64134 Completion Cap Bolts and Nuts (No. Required) 43908 (8) 43908 (8) 501192 (12) 501193 (20) Completion Cap Gasket 36377 36377 62945 63057 Completion Plug Assembly 83490 83490 83491 682233 O-ring Seal 43917 43917 79895 79020 *Nominal ** The 4" x 3" size fitting is a 4" fitting that has been modified to fit 3" steel pipe. This fitting uses 4" tools and equipment. ***This is the maximum pressure of the fitting installed in the line at 100F for Class Locations 1, 2, 3 and 4 as defined in D.O.T./CFR TITLE 49 PART 192. It may be necessary to reduce the line pressure during the drilling, stopping or plugging operations to the maximum working pressure of the machine or its attachments.
