11.18 Shaded area indicates change Rev. 12-06 MUELLER ® SIDE-OUT LINE STOPPER FITTING WELDING TYPE - 720 PSIG o Catalog number – H-17356 o Sizes – 4", 6", 8" Completion Cap o For use on steel pipe only Completion Cap o O-ring sealed steel (ASTM A216 GR. WCB) Completion Plug Bolts and Nuts with equalizing valve (part # 580912) Completion Plug o Flange, Completion Cap, fitting top and bottom halves are O-ring forged steel (ASTM A105) o Pipe pup included for alternative welding options. o Class 300 flange complies with dimensional requirements of ANSI B16.5 o 720 psig** (4964 kPa) maximum working pressure at 100F (38C) Test Plug Gasket Equalizing Valve Completion Plug Assembly Pipe Dimension Size* of Line Stopper Fitting 4" 6" 8" Outside Diameter of Shell Cutter Required 4-1/4" 6-1/4" 8-1/4" Outside Diameter of Pipe 4.500" 6.625" 8.625" H-17356 Maximum Wall Thickness No limit .432" (sch. 80) .406" (sch. 60) Pipe Dimensions Minimum Wall Thickness .188" .250" .250" Max Inside Diameter 4.124" 6.125" 8.125" Drilling/Line Stopping Machine combinations that can be used to install and stop-off H-17356 Fittings Line Stopper Units Drilling Machine Unit No. 2 Unit No. 3 Unit No. 3SW Unit No. 3SW-500 C1-36 H-17356 4" 6" and 8" 4", 6", and 8" 4", 6", and 8" Replacement Parts Fitting Size* 4" 6" 8" Completion Cap 64204 64205 64206 Test Plug 64134 64134 64134 Completion Cap Bolts and Nuts (No. Required) 43911 (8) 500894 (12) 43908 (12) Completion Cap Gasket 36377 62945 63057 Completion Plug Assembly 83490 83491 83492 O-ring Seal 43917 79895 79020 Pipe Pup 528748 528752 528756 *Nominal **This is the maximum pressure of the fitting installed in the line at 100F for Class Locations 1, 2, 3 and 4 as defined in D.O.T./CFR TITLE 49 PART 192. It may be necessary to reduce the line pressure during the drilling, stopping or plugging operations to the maximum working pressure of the machine or its attachments.
Download PDF file