To download individual pages from this catalog*:
- Click the print icon above
- Select Adobe PDF as your printer
- Enter the desired page number or range
*You may also visit the product web page and click the print icon in the upper right corner.
To download individual pages from this catalog*:
*You may also visit the product web page and click the print icon in the upper right corner.
10.2 Rev. 11-18 Shaded area indicates changes MUELLER ® C1-36 ™ DRILLING MACHINE Mueller ® C1-36 Drilling Machine – for drilling operations under pressure – 1-1/2" to 12" inclusive o Catalog number - 39260 / 6:1 feed ratio o Hand or power operation o Designed for use on pressurized or unpressurized mains o Used to cut 1-1/2" to 12" holes o 36" (914 mm) boring bar travel o Use on cast iron pipe • ductile iron pipe • steel pipe o Will make cuts through line stopper fittings, flanged tees and nipples from 3" to 12" o 500 psig (3447 kPa) maximum working pressure at 100 F (38 C) NOTE: The working pressure or temperature rating is reduced accordingly if any attachment , valve, or fitting subjected to pressure or temperature during the drilling operation has a maximum working pressure or temperature rating less than that specified above. Equipment furnished with each Mueller C1-36 Drilling Machine o Wooden Storage Chest ( 680285 not shown) o Ratchet Handle ( 85308 ) o T-handle Socket Wrench ( 59839 ) o Four Double Open End Wrenches ( 96536, 56680, 58196 , and 55726 ) o Eight Machine to Adapter Bolts and Nuts ( 56682 ) o Eight Machine to Adapter Washers (55409) o Machine to Adapter Gasket ( 55449 ) o Cutting Grease ( 88366 ) o Instruction Manual Form 8513 Equipment to be selected o Shell cutters, drills, pilot drills, cutter arbors, and cutter hubs o Machine adapters o Power operators o Optional: 10" long crank handle and lifting yoke (681520) Weight Total shipping weight 424 lbs. (191 kg) Machine only weight 270 lbs. (120 kg) Machine length 51 1/2 " Operations that can be performed using the MUELLER C1-36 Drilling Machine Fitting type Regular Line Stopper Fittings 3" X 4" X Size* of fitting 6" 8" X X 10" X 12" X Operation Cut main Bottom Out Stopper Fittings X X X X X X Cut main Thin Wall Line Stopper Fittings X X Cut main Extension Stopper Fittings X X X X Cut main Flanged Tees X X X X Cut main Save-A-Valve ® Drilling Nipple X X X Cut main * Nominal size Note: Gear Oil is recommended and available in pints (part no. 89273), gallons (part no. 89347) and 7-pint container (part no. 89346).
MUELLER ® C1-36-99002 DRILLING MACHINE 10.3 Shaded area indicates change Rev. 11-18 Mueller ® C1-36-99002 Drilling Machine - for drilling operations under pressure - 1-1/2" to 12" inclusive o Catalog number C1-36-99002 (part number 39262 ) / 8:1 feed ratio o Hand or power operation o Designed for use on pressurized or unpressurized mains o Used to cut 1-1/2" to 12" holes o 36" (914 mm) boring bar travel o Use on cast iron pipe • ductile iron pipe • steel pipe o Will make cuts through line stopper fittings, flanged tees and nipples from 3" to 12" o 500 psig (3447 kPa) maximum working pressure at 100 F (38 C) NOTE: The working pressure or temperature rating is reduced accordingly if any attachment, valve, or fitting subjected to pressure or temperature during the drilling operation has a maximum working pressure or temperature rating less than that specified above. Equipment furnished with each Mueller C1-36-99002 Drilling Machine o Wooden storage chest ( 682085 not shown) o Ratchet handle ( 85308 ) o T-handle Socket wrench ( 59839 ) o Four double open end wrenches ( 96536, 56680, 58196, & 55726 ) o Eight machine to adapter bolts and nuts ( 56682 ) o Eight machine to adapter washers ( 55409 ) o Machine to adapter gasket ( 55449 ) o Cutting grease ( 88366 ) o Instruction manual ( Form #8513 ) Equipment to be selected: o Shell cutters, drills, pilot drills, cutter arbors, and cutter hubs o Machine adapters o Power operators o Optional: 10" long crank handle and lifting yoke ( 681520 ) Weight Total shipping weight 424 lbs. (191 kg) Machine only weight 270 lbs. (120 kg) Machine length 51 1/2 "