Page number 16

10.16 Rev. 11-18 Shaded area indicates changes MUELLER ® H-17246 UNIT NO. 2 COMPLETION MACHINE Mueller H-17246 Unit No. 2 Completion Machine o Catalog number H-17246 o Hand operation o Used to align, insert and extract completion plugs on 3" and 4" Line Stopper Fittings, Flanged Service Tees and Save-A-Valve ® Drilling Nipples o Used in conjunction with Control Valve – 5" Gate Valve ( 88611 ) o Comes in compact wooden storage chest ( 306043 ) o Includes operating instruction manual (Form 8524 ) o Balanced pressure feature o Included with machine: 83520 Inserting Tool, 83521 Extracting Tool, 83522 Alignment Tool, and 36404 Completion Plug Wrench. o 100psig (689 kPa) maximum working pressure at 100F (38C) NOTE: The working pressure or temperature rating is reduced accordingly if any attachment, valve, or fitting subjected to pressure or temperature during the drilling,stopping or completion operations has a H-17246 maximum working pressure or temperature rating less than that specified above. Item Mueller Line Stopper Fittings Mueller Flanged Tees Mueller Save-A-Valve Drilling Nipples Size* of fitting 3" 4" 3" 4" 3" 4" Mueller NO-BLO Operation Align, insert and extract completion plug Mueller NO-BLO ® Operations performed by the Mueller H-17246 Completion Machine *Nominal size

Page number 17

MUELLER ® UNIT NO. 2 COMPLETION EQUIPMENT 10.17 Shaded area indicates change Rev. 6-10 Alignment Tool Alignment tools are used with the completion plug to align the line stopper machine and equipment with the installed line stopper fitting, flanged tee or Save-A-Valve ® Drilling Nipples. Tool Complete 83522 Fork 53858 Collar 53507 Set Screw 97970 Set Screw 502754 Spring 46696 Shank 53859 Alignment Tool Mueller E-Z Release ® Inserting Tool Inserting tools are used to insert completion plugs in Mueller line stopper fittings, flanged tee or Save-A-Valve ® Drilling Nipples under pressure. Tool Complete 83520 Fork 53509 Collar 53507 Set Screw 97970 Spring 46696 Shank 53490 E-Z Release Inserting Tool Extracting Tool Extracting tools are used to remove completion plugs from Mueller line stopper fittings, flanged tee or Save-A-Valve ® Drilling Nipples under pressure. Tool Complete 83521 Fork 53508 Collar 53507 Set Screw 97970 Spring 46696 Shank 53490 Completion Plug Wrench Completion plug wrench is used to “final” tighten the completion plug before the completion cap is attached and is also used to “break” the plug loose prior to removal using the extracting tool. Tool Complete 36404 Thread Cleaning Tool Thread cleaning tool is used to remove any pipe chips or other drilling debris from the completion plug threads in the fitting prior to installation of the completion plug. Size 3" 4" Tool Complete 89316 89317 Shank 503953 503953 Washer 45556 45556 Hex Cap Screw 98570 98570 Brush 305744 301919 Spacer Bar 503936 503954 Bolt 503955 503955 Coupling Nut - 46694 Extracting Tool Completion Plug Wrench Thread Cleaning Tool Inserting Bar Extension Spacer and Sleeve The inserting bar extension spacer and sleeve are used together to increase the stopping machine inserting bar length for stopping off certain fittings, tees and nipples. Size* 3" 4" Inserting Bar Extension Spacer 505554 79403* The 4" spacer and sleeve are only used with 4" Class 300 and above. *Nominal size Inserting Bar Extension Sleeve 505555 79402* Inserting Bar Inserting Bar Extension Extension Spacer Sleeve

    ...