Date: 5 May 2020 Release note for Star Cool controller software 0357 rev 03 The key changes that have been implemented in software version 0357_03 are listed below: 1. Alarm strategy changes New alarms: 202, 206, 658, 666, 780, 803, 819, 828, 852. Removed alarms: 250, 621, 864, 898, 900. Updated alarms: 146, 429 (U/F ratio). Failed temperature sensors are verified during power up and alarms are kept/deactivated. Please refer to the Service Portal or Star Cool App for alarm descriptions and troubleshooting. 2. Defrost changes The ice counter model is optimized in Frozen mode. Too long defrost was observed when running Cold Treatment, which caused the Cold Treatment to fail (restart), an improvement has been made to run defrosts more often when CT is running (requires USDA sensors to be mounted). The defrost key automatically chooses the most applicable defrost, the selectable needs to be done from the menu structure. 3. CA Low oil level detection in the vacuum pump has been implemented during PTI. When there are jumps in the O2 & CO2 sensor readings, the sensor will restart, freeze and recheck the value. If not stable, alarm 310 CO2 sensor and/or alarm 313 for O2 sensor will be activated. It has been observed on some O2 sensors that the 5 minutes heating up time was not sufficient, therefore the counting down timer is replaced with the display text warming up during starting up. It is now possible to enter/reset the run time counter in the controller, Service menu line S08, when the vacuum pump oil and filter have been changed. The vacuum pump pressure values are now also available in PSI. Data logging/Modem Average Tsup and Tret logged correctly in battery mode at power off. Alarm 146 is visible in datalog as a log alarm (no alarm light active). MCI modem (gateway) support menu added in the Service menu, line S09 Modem: W02 W03 W04 W05 W06 Modem Sw ver Modem HW ver Last connected Geofence ver Network list 4. StarConomy Container prefixes are configured with the StarConomy default set to on or off according to the customer specification after software update. Bjerndrupvej 47 • 6360 Tinglev, Denmark • CVR/SE no.: 13 82 37 74 www.mcicontainers.com • service@starcool.com • +45 7364 3400
Download PDF file