Instruction Manual for TECH-system type 288 Important information Important information about LINAK products is presented under the following headers: Warning! Failure to comply with these instructions may result in accidents leading to serious personal injury. NB Failure to comply with these instructions may result in damage to or destruction of the product. Warranty The LINAK warranty covers manufacturing faults in the products, calculated from the date of production. For additional information about the warranty period, contact LINAK Danmark A/S. The warranty is limited to the value of the LINAK product. The LINAK warranty is only valid if the system is unopened and has been used correctly. The control box and control unit must not be subjected to violent handling as this will void the warranty. Safety instructions Please read the following safety information carefully. Everyone who is to connect, install or use the system must have been given the necessary information and must have access to this instruction manual. LINAK recommends that the actuator is used for push applications rather than pull applications. It is essential that everyone who is to connect, assemble or operate the systems receives the necessary information and has access to this instruction manual. Before fitting, removal or troubleshooting: • Stop the actuator. • Disconnect the power supply and remove the mains plug from the socket. • Relieve the actuator of any load that may be released during the work. Before start-up: • Make sure that the system has been installed as described in this instruction manual. • Make sure that the voltage to the motor controller is correct before connecting the system to the power supply. • System connection. The individual parts must be connected before the motor control unit is connected to mains power. During operation: • If the motor controller emits unusual sounds or smells, disconnect the mains current and any external batteries. • Make sure that the cables are not damaged. • Disconnect the mains cable to mobile equipment before moving same. • The products are suitable for use both indoors and outdoors. However, you should check that individual products have the appropriate IP rating class. (see product label) __________________________________________________________________________________________ Page 3 of 33 February 2020 ver. 05 LINAK Danmark A/S - Mønstedsvej 9- DK-8600 Silkeborg -Tel.: +45 86803611 - www.linak.dk
Download PDF file