Continued Function: The SILS Contact strip can be ordered in 15 different lengths from 1m to 8 m in steps of ½ m. To establish communication between the Contact strip and the control box, a LINAK CBDSLS must be used. This ensures that the safety edge disconnects the movement of the height adjustable system and automatically running approximately 50 mm in the opposite direction, before stopping completely. The Contact strip disconnects as a “normal” NO switch. This means that the safety edge disconnects the movement when it is subject to pressure. Connection: The SILS safety edge and CBDSLS are connected between the motor cable on one DL lifting column and the control box. Start-up: Before the system can be used, it must be initialised. This is performed as follows: 1. Use the control’s DOWN button to lower the lifting columns to the lowest position. 2. Hold the DOWN button in for approximately 5 seconds. 3. The system is now ready for operation. Notice! As default only one SILS-Safety edge can be operated on a CBD-control box. Please contact LINAK Danmark A/S for customized solutions. . continues
Download PDF file