DESKLIFT™ DL 8 IC The DESKLIFT™ DL8 IC (Integrated Controller) is a compact 2-part lifting column with round profiles based on our well-known DL8 column. The DL8 IC is a perfect choice for adjustable economy office desks using only 2 columns and requiring a stroke length of maximum 500 mm. The DL8 IC lifting column has the same mounting holes as the 3-part DL9 IC column. Thus, they can be used in the same tabletop construction. The DL8 IC column is available in three standard colours (black, grey and white) - and can optionally be delivered in other colours. An IC system consists of two columns, a master column and a follower column connected via a motor cable. The master column has a built-in control PCB; thus, no separate control box must be mounted in an IC system. The mains supply is an external SMPS (Switch Mode Power Supply) unit, and a variety of desk panels can be used for adjusting the desk. Features: • Compact design where guide and actuator function are an integrated unit • Reinforced column and optimised motor housing design for extra strength and stability • Max. load: 500 N per column • Max. speed: 38 mm/s unloaded • Standard installation dimension: 645 mm • Standard stroke length: 500 mm • Dimensions column: ø63.5 mm (outer profile) and ø57 mm (inner profile) • Dimension motor housing: 177 x 97 x 46 mm • Colour: Available in black (RAL 9005), grey (RAL 9006) or white (RAL 9016) • Low noise level Usage: • 2 parallel drive with one DL8 IC Master and one DL8 IC Follower, and an external power supply (SMPS001 (230 V), an SMPS002 (120 V) or an SMPS006 (Universal)) • Duty cycle: 10 % ≈ 2 minutes continuous use at full load, followed by 18 minutes pause • Ambient temperature: 10 to 40 °C • Storage and transportation temperature: -10 to +70 °C • Compatible with DESKLINE ® controls • Compatible with the Kick & Click™ mounting solution • System compliance, see the Declaration of Conformity in the User Manual LINAK.COM /DESKLINE Be aware that, when a desk panel with display is used, the light intensity must be configured to 50 % before use. With a fully retracted length of 645 mm and a stroke length of 500 mm, it is possible for a standard system to obtain an adjust- ment range of the tabletop from e.g. 750 to 1250 mm. Thus, the desk can be used for sitting as well as for standing types of work.
Dimensional drawings All measurements are without powder coating. DL8 IC Master dimensions (mm)