Page number 2
DESKLIFT TM DL6 IC The DESKLIFT™ DL6 IC (Integrated Controller) is a compact three-part lifting column, based on our well-known DL6 column. The DL6 IC is a perfect choice for adjustable economy office desks only using two columns but needing the maximum adjustment range. The DL6 IC lifting column has the same outer dimensions and mounting holes as the two-part DL5 IC column. Thus, they can be used in the same top frame and foot constructions, including the Kick & Click top frame. For benching desk solutions, the column is available with a bench bracket. The DL6 IC column is very sturdy, and the compact motor housing makes the column easy to integrate in various desk designs. The DL6 IC column is available in three standard colours (black, grey and white) - and can optionally be delivered in other colours. The DL6 IC can also be delivered as a PLUS™ variant with invisible gliding pads for a clean design. An IC system consists of two columns, a master column and a follower column connected via a motor cable. The master column has a built-in control PCB; thus, no separate control box must be mounted in an IC system. The mains supply is an external SMPS (Switch Mode Power Supply) unit, and a variety of desk panels can be used for adjusting the desk. A Desk Sensor™ 1 anti-collision dongle can be added to the system to limit material damage to a desk or an object in case a collision occurs during driving of the desk. Features: • Compact design where guide and actuator function are an integrated unit • Reinforced column and optimised motor housing design for extra strength and stability • Max. load: 500 N per column • Max. speed: 38 mm/s unloaded • Installation dimension: 560 mm 518 mm (BIFMA) • Stroke length: 650 mm 665 mm (BIFMA) • Weight: Approximately 7.5 kg per column • Dimensions column: 50 x 80 mm (outer profile), 43.5 x 73.5 mm (middle profile) and 37 x 67 mm (inner profile) • Dimension motor housing: 177 x 97 x 46 mm • Colour: Available in black (RAL 9005), silver grey (RAL 9006) or white (RAL 9016) • Low noise level Options: • Available with bench bracket • PLUS TM : No visible gliding pads Usage: • 2 parallel drive with one DL6 IC Master, one DL6 IC Follower, and an external power supply SMPS001 (230 V), SMPS002 (120 V) or SMPS006 (Universal) • Duty cycle: 10 % ≈ 2 minutes continuous use at full load, followed by 18 minutes pause • Ambient temperature: 10 to 40 °C • Storage and transportation temperature: -10 to +70 °C • Compatible with DESKLINE ® controls • Compatible with the Kick & Click™ mounting solution • Compatible with DESKLIFT™ Feet • System compliance, see the Declaration of Conformity in the User Manual LINAK.COM /DESKLINE Be aware that when using a desk panel with display, the light intensity must be configured to 50% before use. With a fully retracted length of 560 mm and a stroke length of 650 mm, it is possible for a standard system to obtain an adjust- ment range of the tabletop of e.g. 600 – 1250 mm. Thus, the desk can be used for sitting as well as for standing types of work.
Page number 3
DL6 IC Ordering example: DL6 0 0 0 B N M 650 560 Installation dim. : 560 = 560 mm 518 = 518 mm (BIFMA) Stroke length: 650 = 650 mm 665 = 665 mm (BIFMA) Motor type: M = IC Master S = IC Follower Option: N = Standard P = PLUS series Colour: A = Grey (RAL 9006) B = Black (RAL 9005) D = White (RAL 9016) Mounting bracket: 0 = None 1 = 120 x 40 x 8 mm (with 2 x M8) L = Bench bracket on left narrow side (Follower) R = Bench bracket on right narrow side (Master) Option: 0 = Standard Spindle type: 0 = 20 mm pitch (Standard) Actuator type: DL6 All cables for creating a fully connected DESKLINE system must be ordered separately. We offer a range of different versions and lengths. For information such as ordering number, colour and cable lengths, please contact your local LINAK. Please observe that the item numbers for columns with bench bracket will be created so that the master column will be on the right and the follower column on the left side of the desk, seen from the position of the user.
