Page number 2
DESKLIFT TM DL15 IC The DESKLIFT TM DL15 IC (Integrated Controller) is a compact 2-part lifting column, based on our well-known column DL15 column. The DL15 IC is a perfect choice for adjustable economy office desks using only 2 columns, and requiring a stroke length of maximum 500 mm. The DL15 IC lifting column has the same mounting holes as the 3-part DL16 IC column. Thus, they can be used in the same tabletop construction. The DL15 IC column is available in three standard colours (black, grey and white) - and can optionally be delivered in other colours. An IC system consists of two columns, a master column and a follower column connected via a motor cable. The master column has a built-in control PCB; thus, no separate control box must be mounted in an IC system. The mains supply is an external SMPS (Switch Mode Power Supply) unit, and a variety of desk panels can be used for adjusting the desk. Features: • Compact design where the guide and actuator function are an integrated unit • Reinforced column and optimised motor housing design for extra strength and stability • Max. load 500 N per column • Max. speed without load: 38 mm/s unloaded • Standard installation dimension 645 mm • Standard stroke length 500 mm • Dimensions column: 43.5 x 73.5 mm (outer profile) and 37 x 67 mm (inner profile) • Dimension motor housing: 177 x 97 x 46 mm • Bending moment: My = max. 150 Nm dynamic • Colour: Available in black (RAL 9005), grey (RAL 9006) or white (RAL 9016) • Low noise level Options: • Available as DESKLIFT™ SetPack Usage: • 2 parallel drive with one DL15 IC Master and one DL15 IC Follower, and an external power supply (SMPS001 (230 V), an SMPS002 (120 V) or an SMPS006 (Universal)) • Duty cycle: 10 % ≈ 2 minutes continuous use at full load, followed by 18 minutes pause • Ambient temperature: 10 to 40 °C • Storage and transportation temperature: -10 to +70 °C • Compatible with DESKLINE ® controls • Compatible with the Kick & Click™ mounting solution • System compliance, see the Declaration of Conformity in the User Manual LINAK.COM /DESKLINE Be aware that, when a desk panel with display is used, the light intensity must be configured to 50 % before use. With a fully retracted length of 645 mm and a stroke length of 500 mm, it is possible for a standard system to obtain an adjust- ment range of the tabletop from e.g. 750 to 1250 mm. Thus, the desk can be used for sitting as well as for standing types of work.
Page number 3
Dimensional drawings All measurements are without powder coating. DL15 IC Master dimensions (mm)
