LA30 LA30 is a powerful actuator yet small enough to fit most applications. The actuator can be supplied with options such as built-in potentiometer for servo operation or an extra powerful motor for increased speed and strength (S-motor). In addition to industrial and agricultural applications, the actuator is also ideal for positioning satellite dishes. Features and options: • 12/24V DC permanent magnet motor • Max. thrust up to 6000 N (LA30LK) • Stainless steel piston rod • Elegant and compact construction with small installation dimensions • Protection Class: IPX0/66 • Colour: Black • Speed max. 65 mm/s (LA30 S-motor with 12 mm pitch) • Low noise level • Steel construction for all bearing parts • Acme thread spindle for optimum efficiency • Extra powerful motor (S-motor) • L-motor for system actuator • IP66 (by ordering LA30 with plastic housing) • Double-acting brake - increased self-locking ability (LA30 with 6 or 9 mm pitch + LA30 S-motor with 6 or 9 mm pitch and LA30L) which ensures that all these types are fully self-locking • Potentiometer for positioning the actuator: 0-10 K ohm • Reed switch (only LA30 L-motor versions): 8 pulses pr. spindle revolution • Safety nut (only in push) • Terminal cover (only LA30 L-motor versions) • Ball screw (K) (only LA30 L-motor versions) • Ball screw and safety nut (KAS) (only LA30 L-motor versions) Usage: • Duty cycle: 10%, 2 minutes continuous use followed by 18 minutes not in use • Ambient temperature +5° to +40°C • Storage temperature -40° to +70°C • Compatible with LINAK control boxes. Please contact LINAK. • Approvals: IEC 60601-1, ANSI/AAMI ES60601-1 and CAN/CSA-22.2 No 60601-1 LINAK.COM /TECHLINE LINAK.COM /MEDLINE-CARELINE
Technical specifications: New type Spindle pitch (mm) Thrust max. Push (N) Thrust max. Pull (N) *Self-lock max. With/without brake (N) Typical speed 0/full load (mm/s) Stroke length (mm) 307xx0-4xxxx0/5xx 12 1000 1000 1000/0 48/24 50 100 150 200P 250 300 350 400P 303xx0-4xxxx0/5xx 9 1500 1500 1500/400 42/20 50 100 150P 200 250 300P 350 400 302xx0-4xxxx0/5xx 6 2000 2000 2000/500 18.5/14 50 100P 150 200P 250 300 350 400P 301xx0-xxxxx0/5xx 3 3000 3000 3000/3000 16/9 50P 100P 150 200P 250 300 350 400 307xx0-4xxxx1/2xx 12 1000 1000 1000/0 65/35 50 100 150 200P 250 300 350 400P 303xx0-4xxxx1/2xx 9 1800 1800 1800/0 52/25 50 100 150P 200 250 300P 350 400 302xx0-4xxxx2xx 6 2000 2000 2000/500 34/20.3 50 100P 150 200P 250 300 350 400P 302xx0-4xxxx1xx 6 2400 2400 2400/500 34/20.3 50 100P 150 200P 250 300 350 400P 301xx0-xxxxx1/2xx 3 3500 3000 3500/3500 17/9.5 50P 100P 150 200P 250 300 350 400 307xx0-4xxxx4xx 12 1000 1000 1000/0 26/20 50 100 150 200P 250 300 350 400P 303xx0-4xxxx4xx 9 2000 2000 2000/0 20/13 50 100 150P 200 250 300P 350 400 302xx0-4xxxx4xx 6 3000 3000 3000/2000 13.8/7 50 100P 150 200P 250 300 350 400P 301xx0-xxxxx4xx 3 4000 3000 4000/4000 7/4.5 50P 100P 150 200P 250 300 350 400 30Kxx0-0xxxx4xx 4 6000 3000 6000/n/a 8.7/5.5 - - 150 200 250 300 350 400 30Kxx0-1xxxx4xx 4 6000 3000 6000/n/a 8.7/5.5 - - 150 200 250 300 350 400 30Kxxo-3xxxx4xx 4 6000 3000 6000/n/a 8.7/5.5 - 100 150 200 250 300 350 400 Typical amp. at full load 12V 24V 14 7 14 7 14 7 14 6.4 20 10 20 10 18 - 9 18 9 - 2.5 - 4.4 - 4 - 5.5 - 4.7 - 4.7 - 4.7