How to put the adapter in pairing mode Pairing Bluetooth Buttons Plug the Bluetooth Adapter into a powered HOMELINE® control box or a TD3. When the Bluetooth® Adapter is plugged into a powered TD3 or CBH Advanced, it will be in pairing mode for 3 minutes. A blue blinking LED will indicate this. Select back or leg Select which part to operate back or leg. Backrest (A) and leg rest (B) Storing positions (I) 4 stored positions can be directly accessed by pressing the corresponding button The pairing mode will last 3 minutes and is indicated with a blue flashing LED light that is visible through the transparent plastic. (It can take up to 10 seconds before pairing mode starts). Download the software you want in App Store or Google Play store and follow the instructions in the programs. You pair your device to the Bluetooth® Adapter in the app. Enable Bluetooth on your smartphone or tablet. Open the Bed Control app or Bed Control Memory app and a “search bed” page will be available. When searching; All devices will be called BLE2LIN followed by a 4-digit number. A list of Bluetooth Adapters and previously connected Bluetooth Adapters will appear, tap the adapter you want to connect to. Your device is now paired to the adapter and the app will display the operation page. The Bluetooth Adapter automatically reestablish the connection to the paired devices once they are within range and turned on. The only difference between Bed Control and Bed Control Memory is that there is no memory positions displayed in Bed Control. UP (C) Moves the selected part up Down (D) Moves the selected part down Synchronous drive up and down (E), (F) Moves both back and leg up or down at the same time – independent of the selected part Light (G), (H) Turns on or off the under bed light. The light box must be purchased as an accessory. Storing positions Via the settings page 4 positions are possible to store. Simply press the button and the actual position is stored. Via the bed control page the bed moves to this position when the corresponding icon is pressed. Switch bed To select another connected bed, press the Bluetooth icon in the top right corner of the screen. Then select a connected bed from the list or scan to find new devices. Renaming bed The paired application can be renamed in the Android app on the settings screen. The iOS version does not support renaming the device, so the new name will only be saved in the app. A Back rest C Moves the selected part up D Moves the selected part down I Stored positions (up to 4 available) Go to search screen Turns light on G Turns light off H Leg rest B Moves the back rest and leg E rest up at the same time Moves the back rest and leg F rest down at the same time Settings Copyright© LINAK . 2016.12 . MA-M9-02-645 . LINAK A/S reserves the right to make technical alterations 6 78
Download PDF file