Intended use This product is intended for use indoors in household and commercial usage areas. Do not use outdoors or in wet areas. DF2 | 6 Before installation, re-installation, cleaning, or troubleshooting • Stop the system. • Unplug the mains cable. • Relieve the system of any loads, which may be released during the work. • Review the assembly instructions to confirm that the appropriate critical components and accessories are being used with this product. Before start-up • Make sure that the system has been installed as instructed in this User Manual. • Make sure that the voltage of the system matches the mains voltage before connecting the system to the mains. • Always use the supplied mains cable. During operation • If the system makes unusual noise or smells, unplug the mains cable immediately. • Observe the maximum lifting force/self-lock (per frame; load - including tabletop - equally distributed) Column Desk type Max. lifting force (N) Self-lock (N) Bending moment Three-part T-desk C-desk 1600 1400 1200 Max. 200 Nm dynamic • Duty cycle: 5 %, max. 1 minute continuous use at full load followed by 19 minutes pause. • Take care that the cables are not damaged. CAUTION Load on the desk Risk of injury to persons and of malfunction • Do not overload the frame. • Place heavy load centrally on the desk. • Do not use the desk as a work bench. • Do not use the frame for lifting persons. • Do not stand on the desk while it is driving up or down. NOTICE Duty cycle Risk of malfunction • Do not exceed the duty cycle.
Download PDF file