Before getting started with Reading out service data on a laptop Equipment needed to read out service data When reading out service information on a laptop you need: - Service Data Tool 2 version 2.5.0 or newer version installed on the laptop. The software will be provided from your local LINAK sales representative. - An OpenBus programming and data read out box (LINAK item number IB300001) - A service readout cable (LINAK item number 0964198) - Modular Junction Box for connection of Service Data Tool (LINAK item number MJB000X000-1023) - Cable for connection of the Modular Junction Box to LA43 IC or LA44 IC (LINAK item number 0964461-800-A) - One USB A-B cable How to connect the equipment and get started A) First of all make sure that Service Data Tool drivers and the Service Data Tool 2 software (version 2.5.0 or higher) is installed on your laptop. If Service Data Tool drivers and the Service Data Tool software are not installed please see the SDT2 user manual. B) Connect the equipment as shown below LA43 IC or LA44 IC Cable for MJB Box 0964461-800-A Modular Junction Box MJB000X000-1023 Cable for IB Box 0964198 Foot switch or hand control USB A-B Cable When connection is observed the red LED ( “Supply 8V Missing” ) in the current laptop window changes to green. C) Wake the LA43 IC or LA44 IC (by pressing a button on the hand control or by pressing the foot switch). D) Enter the Start menu on your laptop and choose the LINAK programme to open the Service Data Tool Page 4 of 20
Download PDF file