Before installation, reinstallation, or troubleshooting: • Stop the TD1 • Switch off the power supply and pull out the mains plug. • Relieve the TD1 of any loads, which may be released during the work. Before start-up: • Make sure that the system has been installed as instructed in this User Manual. • Make sure that the voltage is correct before the system is connected to the mains. (See TD1 label on page 11). • System connection. The individual parts must be connected before connection to the mains. During operation • Take care that the cables are not damaged. • Unplug the mains cable on mobile equipment before it is moved. • The products must only be used in an environment, which corresponds to their IP protection. Repairs In order to avoid the risk of malfunction, all TWINDRIVE TM repairs must only be carried out by authorised LINAK workshops or repairers, as special tools must be used and special gaskets must be fitted. TWINDRIVE under warranty must also be returned to authorised LINAK workshops. Warning! If any of the TWINDRIVE TM products are opened, there will be a risk of subsequent malfunction. Furthermore, the warranty will not cover, when the product has been opened by unautorised personnel. Warning! The TWINDRIVE TM systems do not withstand to cutting oil. Warning! If the supply cable is damaged the product must not be used or connected to the mains. The product has to be replaced by a new to avoid a safety hazard. Page 6 of 24
Download PDF file