Page number 2
LA23 DESKLINE® The LA23 is a small and strong push actuator (up to 2500 N). The LA23 can be used in various applications where size is important. The LA23 is e.g. ideal for adding tilt-function to a desk, so the table top can tilt or for adjustment in handicap kitchens. Some of the benefits the LA23 offers you are: • Compact design • High lifting force • Exchangeable cables Features and options: • Load in push: 2500N, 1800N, 1500N, 1200N or 900N • 12 V DC Motor • Grey (RAL7035) or black (RAL9005) housing colour • Protection class: IPX4 or IPX6 • 12 V DC Motor • Stroke length: 20 - 300 mm • Built-in dimensions: 110 - 166 mm + stroke length • Dual Hall and SLS • Back fixture material: Plastic or steel • Nut: Guided • Safety nut: In push • Mechanical spline • Built-in electrical end-stop • Exchangeable cable • Static safety factor: 2.5 • Noise level: Max. 58.5 dB(A) (At nominal voltage and with no load, according to EN ISO3743-1) • Mechanical end stop • Speed 12 mm/sec Usage: • Duty cycle: 10%, 2 minutes continuous use followed by 18 minutes not in use • Usage temperature: +5° - +40° normal operating temp. -30° - +50° according to test conditions: ISO 7176-9 • Storage temperature: -45°C to +70°C (according to ISO 7176-9) • Compatibility: DESKLINE Control boxes • Approved according to EN60335-1 with CBD6S • Fire catagory: Enclosure UL94-V0 • Cycles: The LA23 Life cycle test has been performed with a stabilised power supply (10% duty cycle) on a 200 mm stroke actuator at max. load at 5000 cycles LINAK.COM/DESKLINE
Page number 3
LA23 DESKLINE Ordering example: 23 6 1 A 0 1 0 00 250 A 4 IP degree: 4 = IPX4 6 = IPX6 Motortype: A = 12V Stroke: XXX = mm. Min. 020 mm, Max. 300 mm in steps of 5 mm Recommended versions: 020 mm; 050 mm; 100 mm; 150 mm; 200 mm; 250 mm; 300 mm Positioning: 05 = Dual Hall digital positioning and SLS enabled Safety option: 0 = No safety options (pitch 3, 5, 6, 9 or 12) 1 = Safety nut for push (pitch 3, 5, 6, 9 or 12) 2 = Safety nut for pull (pitch 6, 9 or 12) 3 = Mechanical spline without safety nut (pitch 3, 5, 6, 9 or 12) 4 = Mechanical spline with safety nut (pitch 3, 5, 6, 9 or 12) Housing colour: 1 = Black (RAL 9005) 2 = Light grey (RAL 7035) Piston rod eye: 0 =Standard (steel) with slot (6.1 mm), eye Ø10.2 mm, incl. plastic bushings 1 =Standard (steel) with slot (6.1 mm), eye Ø10.2 mm (0231033) 2 =Standard (steel) with slot (6.1 mm), eye Ø12.3 mm (0231016) Back fixture rotation: 0 = 0° clockwise A = 7.5° clockwise B = 15° clockwise C = 22.5° clockwise D = 30° clockwise E = 37.5° clockwise F = 45° clockwise G = 52.5° clockwise H = 60° clockwise J = 67.5° clockwise K = 75° clockwise L = 82.5° clockwise 1 = 90° clockwise M = 97.5° clockwise N = 105° clockwise P = 112.5° clockwise Q = 120° clockwise R = 127.5° clockwise S = 135° clockwise T = 142.5° clockwise U = 150° clockwise V = 157.5° clockwise W = 165° clockwise Z = 172.5° clockwise Back fixture: 1 = Plastic with slot (6.1 mm), eye Ø10.2 mm (only for Standard push load) (0231017) (only for pitch 6, 9 or 12 and safety option 0 or 1 (push)) 2 = Steel with slot (6.1 mm), eye Ø10.2 mm, incl. plastic bushings 3 = Steel with slot (6.1 mm), eye Ø10.2 mm (0231034) 4 = Steel with slot (6.1 mm), eye Ø12.3 mm (0231020) Spindletype: 3 = 3 mm pitch (2500 N) 5 = 5 mm pitch (1800 N) 6 = 6 mm pitch (1500 N) 9 = 9 mm pitch (1200 N) 0 = 12 mm pitch (900N) Actuator type: 23 = LA23 Note: • Cables must be ordered separately (for specifications and item numbers see later pages). • Cable locks must be ordered separately for LA23 (for item numbers, see later pages). • When the built-in dimensions (BID) are special, write xxx when ordering, write stroke + BID in system specification. • Noise can occur if plastic bushings are not fitted in the Piston rod eye / Back fixture
