Features and options CO71 | 4 Power supply Mains indicator Actuator interface Hand control interface CO-Link™ Bluetooth ® Battery interface Standby power Colour Output short-circuit protected Control concept Power Supply Circuit Method Duty cycle Weight Actuator compatibility Battery charger Charging indicator Acoustic warning signal Battery alarm PCP version EOP IP-Rating Operation Max. current Universal, SMPS (Switch Mode Power Supply) 350 W power output 100-240 VAC, 50/60 Hz -15% / +10% Yes - Green LED (mains connected) 4 channel 6-pin Mini-Fit 1 port 10-pin modular plug Link of primary and secondary CO71 - up to 8 channels and combination of all control boxes Yes 1 port 4-pin Mini-Fit (output 300 mA when no actuators are running) Approx. 0.5 W (120/230 V) Light grey (RAL 7035) Yes FET (no relay noise) Full bridge 10 % - 2/18 min. on/off continuous use. Maximum power is 350 W for 80 seconds and 175 W for 40 seconds at 25 °C. Low weight 0.8 kg Actuators with signal, feedback by Hall and potentiometer Battery input available No charger, but supports battery with internal charger Supported by using BA21 Internal buzzer Integrated or via BA19/BA21 Will be used as PCP 1.0 and 2.0 (to be defined in SW) Yes IPX6 Washable DURA TM True parallel (Hall feedback) 10 A/CH, 2/18 min. Max. 14 A/CH in a limited time period
Download PDF file