Features and options CO65 | 4 Power supply Mains indicator CO-Link™ Actuator interface Hand control interface Battery interface Standby power Colour Output short-circuit protected Control concept Power Supply Circuit Method Duty cycle Weight Actuator compatibility Battery charger Charging indicator Acoustic warning signal Battery alarm PCP version EOP IP-Rating Housing type Operation Max. current Universal, SMPS (Switch Mode Power Supply) 280 W power output 100-240 VAC, 50/60 Hz -15% / +10% Yes - Green LED (mains connected) Link of primary and secondary CO65 – up to 8 channels and 2x280 W 4 channels 6-pin Mini-Fit 1 port 10-pin modular plug 1 port 4-pin Mini-Fit (output 300 mA when no actuators are running) Approx. 0.5 W (120/230 V) Light grey (RAL 7035) Yes FET (no relay noise) Half bridge 10% - 2/18 min. on/off continuous use SMPS load profile: 80 sec./280 W + 40 sec./140 W + 18 min./20 W Low weight 0.7 kg Actuators with signal, feedback by hall and potentiometer Battery input available No charger, but supports battery with internal charger Supported by using BA21 Internal buzzer Supported by using BA21 Will be used as PCP 1.0 and 2.0 (to be defined in SW) Yes IPX6 Washable DURA TM V-0, PP (chemical resistant sealed-for-life housing) True parallel (Hall feedback) 10 A/ch, 2/18 min. max. 14 A/ch. in a limited time period
Download PDF file