Page number 2
BA19 Lead Acid The BA19 lead acid backup battery has been developed specifically for use with the CA/CO control box platform. It is a compact and cost-efficient battery with built-in charger and cable management. A further advantage of the BA19 lead acid battery is the functional attachment of the battery by means of the LINAK mounting bracket and a securing screw on the application. The battery provides charging status information to the control box which makes it possible to receive an indication on OpenBus™ system hand controls. Features and options: • Lead acid technology: Lead acid • Output voltage: 24 V DC • Max. discharge current: 6 A • Charging current: 300 mA, controlled by BA19 internal charger • Capacity: 1.2 Ah/28.8 Wh • Weight: 1.6 kg • Housing colour: Light grey (RAL 7035) • Protection class: IPX6, IPX6 Washable DURATM • Packaging: Multibox • PCP version: PCP 2.0 Usage: • Compatibility: Battery backup for CA/CO control box platform • Duty cycle: 10%, 2 minutes continuous use followed by 18 minutes not in use • Charging: Via integrated charger • Charging time: Approx. 6 hours • Recharging during storage: Battery recharging no later than 6 months after production date stated on the label • Operating temperature: +5 °C to +40 °C • Storage temperature: -5 °C to +40 °C The batteries must be stored in an applicable storage room to avoid direct sunlight • Relative humidity: 20% to 80% - non-condensing • Atmospheric pressure: 700 to 1060 hPa • Height above sea level: Max. 3000 meters • Service: Battery cells cannot be replaced as the battery cover cannot be closed properly afterwards • Approvals (pending): IEC60601-1:2005 3rd edition, ANSI/AAMI ES60601-1: 2005, 3rd edition CAN/CSA-22.2 No. 60601-1:2008 LINAK.COM/MEDLINE-CARELINE
Page number 3
LED functionality: LED Solid yellow No LED light Flashing yellow Indication of operation Charging (battery not ready) Fully charged (battery ready) Error during charging Buzzer functionality: The buzzer will make a warning when a button on the hand control is pressed and the battery capacity is low. The buzzer can also be activated by an intelligent control box to signal other conditions. This must be specified in the control box software.
