Chapter 1 Specifications Motor: Cable: Gear ratio: Slip clutch: Brake: Hand crank: Housing: Spindle part: Piston rod eye and back fixture: Temperature range: Storage temperature: Weather protection: Noise level: Permanent magnet motor 12, 24, 36 or 48V DC* Motor: 2 x 14 AWG PVC cable Control: 6 x 20 AWG PVC cable ** 6 different gear ratios available in steel (500 N, 1,700/2,600 N, 4,500 N and 6,800 N) Mechanical overload protection through an integrated slip clutch Integrated brake ensures a high self-locking ability. The brake is deactivated when the actuator is powered in order to obtain a high efficiency As a standard feature the actuator can be operated manually The housing is made of casted aluminium, coated for outdoor use and in harsh conditions Outer tube: Extruded aluminium anodised Inner tube: Stainless steel AISI304/SS2333 Acme spindle: Trapezoidal spindle with high efficiency When ordering AISI (304 and up) piston rod eye and back fixture, stainless steel screws are automatically included - 30 o C to +65 o C For IECEx/ATEX: - 25 o C to +65 o C - 22 o F to +149 o F - 13 o F to +149 o F Full performance +5 o C to +40 o C -55°C to +105°C Rated IP66 for outdoor use. Furthermore, the actuator can be washed down with a high-pressure cleaner (IP69K). 73dB (A) measuring method DS/EN ISO 8746 actuator not loaded. * Modbus actuators only 24V - please see the Modbus installation guide http://www.linak.com/techline/?id3=2363 . ** Special control cabels for the Modbus actuator - please see the Modbus installation guide http://www.linak.com/techline/?id3=2363 . Be aware of the following two symbols throughout this product data sheet: Recommendations Failing to follow these instructions can result in the actuator suffering damage or being ruined. Additional information Usage tips or additional information that is important in connection with the use of the actuator. Page 4 of 27
Download PDF file