LA34 | 4 Options • Max. thrust 6,000 N in pull (safety nut in pull and steel piston rod eye - see ordering example) • Mechanical spline: When using the actuator in a vertical position, the force needed to activate the mechanical spline is maximum 60N + the weight of the application. To reengage the spline function, a force of maximum 60N is needed. Same installation dim. as standard actuator. • Quick release system (push) enables stepless retraction of the actuator when lowering (mechanical emergency lowering). When ordering quick release freewheeling is automatically included. • Quick release actuators with an installation dimension below 340 mm can only be ordered as a special article. • Bowden cable solution for quick release (min. stroke 150 mm) • Quick release with signal switch can be ordered as a special article. • A modified Bowden cable holder is available (as a special article), with better cable alignment and improved guidance of the cables (see page 10). • Double bowden cable solution for quick release • Stroke length: up to 600 mm for version with short installation dim. as a special article • Compact housing • Safety nut in pull direction (increases the installation dimension by 10 mm) • Electric spline: When using the actuator in a vertical position, the force needed to activate the electric spline is maximum 100N + the weight of the application. To reengage the spline function, a force of maximum 100N is needed. • Hall sensor. If used in combination with QR, the position will be lost when the QR is activated. Has to be ordered as a special article. • Exchangeable cables • Reed switch system, only as a special article and if the application is approved by LINAK A/S. • The choice of Reed with DIN cable, option A, will reduce the cable length by approx. 80mm. • Potentiometer (max. stroke lengths): ( zero positioning <0,1 V at a stable 10 V supply) - LA34 with 12 mm pitch max. 250 mm - LA34 with 16 mm pitch max. 330 mm - LA34 with 20 mm pitch max. 416 mm • Potentiometer in combination with Jack and DIN plugs is not possible in the LA34 composite actuator. Potentiometer cannot be combined with electric spline. • Colour black (only housing and cable) Usage • Duty cycle: 2/18 – 2 minutes continuous use followed by 18 minutes not in use • Ambient temperature +5° to +40° C • Compatible with LINAK control boxes. Please contact LINAK.
Download PDF file