Technical specifications: Article number to be ordered Combination code Spindle pitch [mm] Back fixture Piston rod Option Colour Safety option Brake Stroke length [mm] Built-in dimension [mm] Motor type IP degree Plug type (connection) Trust max. (Push) [N] Self-lock max. [N] Typical speet at 0 load/full load [mm/s] 270284-00 27431HA2006004C 4 3 1 hall raL 7016 spline no 0-60 240-300 standard 54 mini-fit 3000 3000 4.8/4.2 270351-00 27431HA2010004C 4 3 1 hall raL 7016 spline no 0-100 280-380 standard 54 mini-fit 3000 3000 4.8/4.2 270398-00 27431HA2015004C 4 3 1 hall raL 7016 spline no 0-150 330-480 standard 54 mini-fit 3000 3000 4.8/4.2 270319-00 27431HA2020004C 4 3 1 hall raL 7016 spline no 0-200 380-580 standard 54 mini-fit 3000 3000 4.8/4.2 Variable stroke length and built-in dimension: the stroke length and built-in dimension of the La27 can be configured in the td33. if nothing is configured and the La27 is connected to a standard td33 the actuator will run maximum stroke. when running maximum stroke the built-in dimension will be minimum. if a certain stroke / built-in dimension or both are required the td33 has to be configured. stroke and built-in of the La27 must always to be configured in the td33. Start up/initializing the LA27 actuator(s): after connection of the La27 the system has to be initialized. push on the bottom down for the La27 which has to be initialized, when the sound from the La27 stops, the system is initialized. if more than 1 actuator is connected, the same has to be done with the other channels.
Download PDF file