Page number 2
LA23 The LA23 actuator is a small and strong push or pull actuator (up to 2500 N). The LA23 can be used in various applications where size is important. Some of the benefits the LA23 offers you are: • Compact design • High lifting force • Exchangeable cables • Available with integrated controller (IC) This TECHLINE® actuator comes with IC - Integrated controller. For more information on our IC options, please see: www.linak.com/techline Features and Options: • Load in push: 2500N, 1800N, 1500N, 1200N or 900N • Load in pull: 2500N, 1800N, 1500N, 1200N or 900N • Housing colour: Grey or black • Protection class: IPX4 or IPX6 • Motor: 12 V DC, 24 V DC • Stroke length: 20 - 300 mm • Built-in dimensions: 110 mm + stroke length • Positioning options: - Potential free end stop signals - Hall potentiometer or Hall PWM positioning - Hall - Single Hall/Dual Hall • Back fixture material: Plastic or steel • Nut: Guided • Safety nut: In push or pull (2500N and 1800N version only safety nut in push) • Mechanical spline Yes • Built-in electrical end-stop: Yes • Exchangeable cable: Yes • Static safety factor: 2.5 • Noise level: Max. 58.5 dB(A) (At nominal voltage and with no load, according to EN ISO 3743-1) • Mechanical end stop Yes • Integrated Control Yes LINAK.COM/TECHLINE Usage: • Duty cycle: 10%, 2 minutes continuous use followed by 18 minutes not in use • Usage temperature: -30°C to +55°C (according to ISO 7176-9) • Storage temperature: -45°C to +70°C (according to ISO 7176-9) • Fire catagory: Enclosure UL94-V0 • Cycles: The LA23 Life cycle test has been performed with a stabilised power supply (10% duty cycle) on a 200 mm stroke actuator at max. load for the following number of cycles (at 20°C ambient temperature): 3 mm pitch = 5.000 cycles 5, 6, 9 and 12 mm pitch = 10.000 cycles • Compatibility: The LA23 IC is compatible with SMPS-T160 (For combination possibilities, please see the User Manual for SMPS-T160) • Approvals: IEC60601-1, ANSI/AAMI ES60601-1, CAN/CSA 22.2 No 60601-01
Page number 3
LA23 TECHLINE Ordering example: 23 6 1 A 0 1 0 00 250 A 4 IP degree: 4 = IPX4 6 = IPX6 Motortype: A = 12V (Always for DESKLINE applications) B = 24V (Running mainly with battery (CBJ1, CBJ2, CBJH, CBJC, wheelchairs)) G = 24V (For OpenBus (CB20, CB16, CB6s)) not available with LA23IC Stroke: XXX = mm Min. 020 mm, Max. 300 mm in steps of 5 mm Recommended versions: 020 mm; 050 mm; 100 mm; 150 mm; 200 mm; 250 mm; 300 mm Positioning: 00 = No positioning 01 = Potential free end stop signals 02 = Dual Hall digital positioning (Always for DESKLINE applications) 03 = Dual Hall PNP positioning 1x = Hall potentiometer feedback 2x = Hall potentiometer feedback and potential free endstop 3x = Hall PWM position feedback 4x = Hall PWM position and potential free endstop 50 = IC with standard electrical endstop - no positioning 52 = IC with Standard Single Hall Positioning 6x = IC with Hall potentiometer feedback. 7x = IC with Hall PWM position feedback Xx = For more positioning options see later pages Safety option: 0 = No safety options (pitch 3, 5, 6, 9 or 12) 1 = Safety nut for push (pitch 3, 5, 6, 9 or 12) 2 = Safety nut for pull (pitch 6, 9 or 12) 3 = Mechanical spline without safety nut (pitch 3, 5, 6, 9 or 12) 4 = Mechanical spline with safety nut (pitch 3, 5, 6, 9 or 12) Standard BID see later pages Overview see later pages Housing colour: 1 = Black 2 = Light grey (RAL 9005) (RAL 7035) Piston rod eye: 0 =Standard (steel) with slot (6.1 mm), eye Ø10.2 mm, incl. plastic bushings 1 =Standard (steel) with slot (6.1 mm), eye Ø10.2 mm 2 =Standard (steel) with slot (6.1 mm), eye Ø12.3 mm Back fixture rotation: 0 = 0° clockwise A = 7.5° clockwise B = 15° clockwise C = 22.5° clockwise D = 30° clockwise E = 37.5° clockwise F = 45° clockwise G = 52.5° clockwise H = 60° clockwise J = 67.5° clockwise K = 75° clockwise L = 82.5° clockwise 1 = 90° clockwise M = 97.5° clockwise N = 105° clockwise P = 112.5° clockwise Q = 120° clockwise R = 127.5° clockwise S = 135° clockwise T = 142.5° clockwise U = 150° clockwise V = 157.5° clockwise W = 165° clockwise Z = 172.5° clockwise Back fixture: 1 = Plastic with slot (6.1 mm), eye Ø10.2mm (only for Standard push load) (only for pitch 6, 9 or 12 and safety option 0 or 1 (push)) 2 = Steel with slot (6.1mm), eye Ø10.2 mm, incl. plastic bushings 3 = Steel with slot (6.1mm), eye Ø10.2 mm 4 = Steel with slot (6.1mm), eye Ø12.3 mm Spindle type: 3 = 3 mm pitch (2500 N) 5 = 5 mm pitch (1800 N) 6 = 6 mm pitch (1500 N) 9 = 9 mm pitch (1200 N) 0 = 12 mm pitch (900N) Actuator type: 23 = LA23 Note: • Cables must be ordered separately. • Cable locks must be ordered separately for LA23.
