Page number 6
DL6 | 6 All cables for creating a fully connected DESKLINE ® system must be ordered separately. We offer a range of different versions and lengths. To get information such as ordering number, and colour and length of the cables, please contact your local LINAK. If you want to operate a 1200 N column without PIEZO™ with a desk panel with display, you must configure the actuator type in the control box to ensure the correct read-out. If you want to operate a 1200 N column with PIEZO™, do not configure the actuator type. This column has IID and will automatically be detected as the right type of column. A column in BIFMA version is less stable in the full stroke length compared to a standard column as it has less overlap between the profiles.
Page number 7
DL6 | 7 Technical data Performance curves The following data is measured in connection with 2 to 4 lifting columns and control box CBD6S. The desk is driving upwards. The curves below apply to a centrally placed load. With moment load, there will be increased friction in the columns, which will reduce the lifting force correspondingly. DL6 800 N (20 mm spindle) Figure 1 Two columns (equally loaded) Figure 2 Three columns (equally loaded) with CBD6S - 300 W Figure 3 Four columns (equally loaded) with CBD6S - 300 W
