Page number 6
DESKLIFT™ DL2 | 6 Dimension drawings LA31 in combination with CBD6S needs to be initialised at start-up. When the system is initialised, the actuator will stop before the end switches. Therefore, the stroke length is reduced, and the installation dimension is increased. The values are the same for the different spindle types. Stroke length reduction: 3 mm Installation dimension increase: 1.5 mm DL2 Combination code S (Stroke length) [mm] B (Built-in length) [mm] O (Outer profile length) [mm] DL2xxxxxx300xxx 300 445 / 450 / 455 420 DL2xxxxxx350xxx 350 495 / 500 / 505 470 DL2xxxxxx500xxx 500 645 / 650 / 655 620 Figure 3 DL2 built-in length, stroke length, and outer profile length (mm) Figure 4 DL2 profile dimensions (mm)
Page number 7
DESKLIFT™ DL2 | 7 End plates LINAK A/S supplies the lifting column with either 8 mm or 3 mm end plates. The DL2 can be prepared for built-in CBD6S. Installation dimensions: Column without end plates + 2 x the thickness of the required end plates. Example: 639 mm + (2 x 8 mm) = 655 mm. All measurements are without powder coating. Figure 5 3 mm bottom plate (left) and top plate (right) dimensions (mm) The maximum torque for tightening the DG 80x35 screws included for DL2 colums with 3 mm end plates is 15 Nm. Figure 6 8 mm bottom plate (left) and top plate (right) dimensions (mm)
