Page number 4
Features and options CO61 MK2 | 4 Power supply Mains indicator Actuator interface Hand control interface CO-Link™ Bluetooth ® Low Energy Battery interface Standby power Colour Output short-circuit protected Control concept Power Supply Circuit Method Duty cycle Weight Actuator compatibility Battery charger Universal, SMPS 200 W power output (Switch Mode Power Supply) 100-240 VAC, 50/60 Hz -15% / +10% Yes - Green LED (mains connected) 4 channels 6-pin Mini-Fit 1 port 10-pin modular plug Link of primary and secondary CO61 MK2 - up to 8 channels and 2x200 W Bluetooth Low Energy gen. 2 available as option 1 port 4-pin Mini-Fit (output 300 mA when no actuators are running) w/o Bluetooth Low Energy: Approx. 0.5 W (100-240 V AC) w/ Bluetooth Low Energy: Approx. 0.6 W (100-240 V AC) Light grey (RAL 7035) Yes FET (no relay noise) Half bridge/Full bridge 10% - 2/18 min. on/off continuous use. Maximum power is 200 W for 80 seconds and 100 W for 40 seconds at 25 °C Low weight 0.7 kg Actuators with signal, feedback by hall and potentiometer Battery input available. No charger, but supports battery with internal charger Charging indicator Acoustic warning signal Battery alarm PCP version EOP IP-Rating Supported by using BA22 Internal buzzer Supported by using BA22 PCP 2.0 (PCP 1.0 available in SW) Yes IPX6 Washable DURA TM
Page number 5
Operation Max. current Accessories Power management Overload protection Safety system Start/stop Protection class Cable lock Mounting CO61 MK2 | 5 True parallel (hall feedback) 10 A/CH, 2/18 min. Max. 12 A/CH in a limited time period OpenBus ™ standard High speed at low loads and/or high loads at a lower speed The CO61 MK2 can reduce the output voltages to prevent overload Thermally protected Short-circuit protected Hot-plugging protected Soft start/direct stop Class 2 Class 1 is possible with pigtail on mains cable Integrated in lid Compatible with a wide range of mounting brackets
