Page number 2
Service Data Tool for JUMBO Care 2nd generation Service Data Tool ensures efficient maintenance of patient lifts. Service data tool enables easy read out of service data from the CBJ-Care. Coloured graphic bars in green, yellow and orange indicate when it is time for maintenance. Safe patient handling is ensured by easy access to • Knowledge about wear and tear • Fault finding tool • Easy service visit reports Features and Options: • Read out service data on laptop via Service data tool • Service counters for counting of days or cycles - indicates time for service visits (12 months / 8000 cycles whichever comes first) • Possibility to change the service intervals e.g. to shorter intervals if lift gets worn • Information about battery state helps to ensure the patient lift functional at all times • Number of low critical battery level since last reset and totally for indication of battery behavior • Actuator life time information is read out of the JUMBO Care control box • Intelligent cycle counter counts only when lift is loaded • Intelligent work counter sums up the work done by the actuators and considers how much the actuators have been loaded • Overload information about why the patient lift has stopped reduces number of service visits • Easy service visit reports for documentation of service visit • Help icon for easy data explanation • Information icon e.g. for adding checklist for Service Technician to follow LINAK.COM/MEDLINE-CARELINE
Page number 3
Service Data Tool user interface The Service data tool for JUMBO Care 2nd generation is developed with focus on user friendly design which is easy to use. Information is divided into sections as below: Section Summary Actuators Control box Controls_InputOutput Report Advanced settings Used for…. For quick and easy overview of service indicator, battery status and actuator statistics For detailed information about the actuators’ statistical service data For detailed information about the control box and battery state For detailed information about hand control signals and codes For service reporting and resetting of service counters via hand control after saving report Intended for trained and authorised service technicians only. For change of service settings and update of actuator info if the control box is replaced to maintain service data. For update of information when replacing the actuator Summary section: For quick and easy overview of service indicator, battery status and actuator statistics
